• How To Design A Signal Amplification PC Board
    #PrintedCircuitBoard
    #PCBdesign
    #PCBoardassembly
    Various kinds of circuit boards are essential for electronic devices and the amplifier PCB is one of them. You need amplifiers to reproduce sounds, so the amplifier circuit board is vital for sound-generating devices, such as loudspeakers.
    Understanding An Amplifier PCB
    A PCB with an amplifier produces enhanced signals that input terminals require. Such a circuit board consists of electronic components to transfer signals. The components also increase the power of the amplifier by transferring signals through specific transistors. A substrate is an essential part of an amplifier circuit board like it’s a surface with components and it is composed of resin and fiberglass.
    Though the amplifier is an independent component, it has several parts in it. An amplifier circuit board has many resistors and capacitors to perform various functions. Moreover, it has input and output terminals for both original and amplified signals.
    Such a PCB can be small or large, depending on the device and its application. Generally, the headphones amplifiers are small, whereas the professional sound system has a large amplifier that singers and musicians often use. The size of a large amplifier Printed Circuit Board goes beyond 100 square inches.
    The small amplifiers often depend on an external source for power supply whereas the battery-driven amplifiers are different. Such PCBs are either power amplifiers or audio amplifiers.
    Read more: https://bit.ly/3uMBVlE
    Website: https://pnconline.com/
    Facebook: https://www.facebook.com/PNCONLINE
    Twitter: https://twitter.com/PNCINC
    Instagram: https://www.instagram.com/pnc_pcb/
    Tumblr: https://www.tumblr.com/blog/view/pncinc
    Myspace :https://myspace.com/pncinc2020
    Bresdel: https://bresdel.com/pncinc
    Pinterest :https://www.pinterest.com.au/rrosh2014/_created/

    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    How To Design A Signal Amplification PC Board #PrintedCircuitBoard #PCBdesign #PCBoardassembly Various kinds of circuit boards are essential for electronic devices and the amplifier PCB is one of them. You need amplifiers to reproduce sounds, so the amplifier circuit board is vital for sound-generating devices, such as loudspeakers. Understanding An Amplifier PCB A PCB with an amplifier produces enhanced signals that input terminals require. Such a circuit board consists of electronic components to transfer signals. The components also increase the power of the amplifier by transferring signals through specific transistors. A substrate is an essential part of an amplifier circuit board like it’s a surface with components and it is composed of resin and fiberglass. Though the amplifier is an independent component, it has several parts in it. An amplifier circuit board has many resistors and capacitors to perform various functions. Moreover, it has input and output terminals for both original and amplified signals. Such a PCB can be small or large, depending on the device and its application. Generally, the headphones amplifiers are small, whereas the professional sound system has a large amplifier that singers and musicians often use. The size of a large amplifier Printed Circuit Board goes beyond 100 square inches. The small amplifiers often depend on an external source for power supply whereas the battery-driven amplifiers are different. Such PCBs are either power amplifiers or audio amplifiers. Read more: https://bit.ly/3uMBVlE Website: https://pnconline.com/ Facebook: https://www.facebook.com/PNCONLINE Twitter: https://twitter.com/PNCINC Instagram: https://www.instagram.com/pnc_pcb/ Tumblr: https://www.tumblr.com/blog/view/pncinc Myspace :https://myspace.com/pncinc2020 Bresdel: https://bresdel.com/pncinc Pinterest :https://www.pinterest.com.au/rrosh2014/_created/ Call us: (973) 284-1600 Email us: sales@pnconline.com Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    PNCONLINE.COM
    Circuit Board manufacturer | PCB Prototype | PNC Inc. US
    The largest Printed Circuit Boards Manufacturer in North East. One Stop solution, Total Concept PCB company for your PC Board Design, PC Board Manufacturing an
    0 Comments 0 Shares 2534 Views
  • Stencils for SMT Assembly
    #PrintedCircuitBoard
    #PCBAssembly
    #PCBOARD
    #PCBoardassembly
    A stencil mask is used in many manufacturing processes to make PCBs. This includes SMT stencils which are most commonly used in the process of making printed circuit boards. The use of these SMT stencils varies based on the size and complexity of the board that they will be used on and the type of assembly machine that will be using them.
    For any SMT stencil application, solder paste should be used for paste dispensing. Advantages of using a stencil method are high yield rate, high accuracy, and repeatability, low labor cost, and good surface finish. The main disadvantage is that it is not suitable for mass production or high-mix low-volume assembly.

    SMT Stencil Types
    There are two types of stencils, including manual and automatic. Manual stencils are available in many materials, such as stainless steel, plastic, etc., while the automatic ones are made from silicon rubber material which has been pre-impregnated with the conductive paste by screen printing methods. Both manual and automatic stencils require cleaning after each use.
    Read more: https://www.pnconline.com/blog/stencils-for-smt-assembly/
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    Stencils for SMT Assembly #PrintedCircuitBoard #PCBAssembly #PCBOARD #PCBoardassembly A stencil mask is used in many manufacturing processes to make PCBs. This includes SMT stencils which are most commonly used in the process of making printed circuit boards. The use of these SMT stencils varies based on the size and complexity of the board that they will be used on and the type of assembly machine that will be using them. For any SMT stencil application, solder paste should be used for paste dispensing. Advantages of using a stencil method are high yield rate, high accuracy, and repeatability, low labor cost, and good surface finish. The main disadvantage is that it is not suitable for mass production or high-mix low-volume assembly. SMT Stencil Types There are two types of stencils, including manual and automatic. Manual stencils are available in many materials, such as stainless steel, plastic, etc., while the automatic ones are made from silicon rubber material which has been pre-impregnated with the conductive paste by screen printing methods. Both manual and automatic stencils require cleaning after each use. Read more: https://www.pnconline.com/blog/stencils-for-smt-assembly/ Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    WWW.PNCONLINE.COM
    Stencils for SMT Assembly
    The use of these Stencils for SMT Assembly varies based on the size and complexity of the board that they will be used on and the type of assembly machine.
    0 Comments 0 Shares 1380 Views
  • Stencils for SMT Assembly
    #PrintedCircuitBoard
    #PCBAssembly
    #PCBOARD
    #PCBoardassembly
    A stencil mask is used in many manufacturing processes to make PCBs. This includes SMT stencils which are most commonly used in the process of making printed circuit boards. The use of these SMT stencils varies based on the size and complexity of the board that they will be used on and the type of assembly machine that will be using them.
    For any SMT stencil application, solder paste should be used for paste dispensing. Advantages of using a stencil method are high yield rate, high accuracy, and repeatability, low labor cost, and good surface finish. The main disadvantage is that it is not suitable for mass production or high-mix low-volume assembly.
    View more: https://youtu.be/YiEIYUo_JpI
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    Stencils for SMT Assembly #PrintedCircuitBoard #PCBAssembly #PCBOARD #PCBoardassembly A stencil mask is used in many manufacturing processes to make PCBs. This includes SMT stencils which are most commonly used in the process of making printed circuit boards. The use of these SMT stencils varies based on the size and complexity of the board that they will be used on and the type of assembly machine that will be using them. For any SMT stencil application, solder paste should be used for paste dispensing. Advantages of using a stencil method are high yield rate, high accuracy, and repeatability, low labor cost, and good surface finish. The main disadvantage is that it is not suitable for mass production or high-mix low-volume assembly. View more: https://youtu.be/YiEIYUo_JpI Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    0 Comments 0 Shares 494 Views
  • Printed Circuit Board Routing Practices after Auto Routing
    #PCBoardFabrication
    #PCBOARD
    #PCBdesign
    #PCBoardassembly
    In electronic design, PCB routing is the positioning of conductive pathways on a printed circuit board before final soldering and interconnection. The purpose of PCB routing is to have an arrangement where signal traces connect electrically to components and other signal traces while avoiding the signal crosstalk and maintaining short electrical paths between the components.
    You can have a manual PCB through computer-aided design software or the use of specialized routing hardware, such as manually controlled routers or auto-routers.
    How To Reset Your Board After Auto Routing
    If you’ve used an auto-router, but you’re not happy with its results, you can fix it in different ways. Moreover, if you know what a DRC is, you can use it to override certain errors that auto-router made.
    DRC means the Design Rule Check which you can perform by running an ERC or Error Report Check. The ERC will report all of your errors on your design file on a text file. It will then tell you how many errors are found in each layer.
    You can then go into each layer and manually change any error that was reported by using the P-CAD’s drag function to move components around until they fit perfectly within their pads or tracks. This is also known as drag fitting.
    When everything fits perfectly, save your design as a new version so that you don’t accidentally erase anything important. Once saved, run another DRC and see if it finds anything else wrong with your board layout. If not, continue with another step to check for shorts between traces/pads/vias/traces, etc.
    After fixing these issues, perform another DRC again. Now that everything looks good, export your Gerber files. Make sure you select the top copper layer only and then hit OK. Your Gerber files should now be ready to send off for PC Board Fabrication.
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    Read more: https://www.pnconline.com/blog/printed-circuit-board-routing-practices-after-auto-routing/
    Printed Circuit Board Routing Practices after Auto Routing #PCBoardFabrication #PCBOARD #PCBdesign #PCBoardassembly In electronic design, PCB routing is the positioning of conductive pathways on a printed circuit board before final soldering and interconnection. The purpose of PCB routing is to have an arrangement where signal traces connect electrically to components and other signal traces while avoiding the signal crosstalk and maintaining short electrical paths between the components. You can have a manual PCB through computer-aided design software or the use of specialized routing hardware, such as manually controlled routers or auto-routers. How To Reset Your Board After Auto Routing If you’ve used an auto-router, but you’re not happy with its results, you can fix it in different ways. Moreover, if you know what a DRC is, you can use it to override certain errors that auto-router made. DRC means the Design Rule Check which you can perform by running an ERC or Error Report Check. The ERC will report all of your errors on your design file on a text file. It will then tell you how many errors are found in each layer. You can then go into each layer and manually change any error that was reported by using the P-CAD’s drag function to move components around until they fit perfectly within their pads or tracks. This is also known as drag fitting. When everything fits perfectly, save your design as a new version so that you don’t accidentally erase anything important. Once saved, run another DRC and see if it finds anything else wrong with your board layout. If not, continue with another step to check for shorts between traces/pads/vias/traces, etc. After fixing these issues, perform another DRC again. Now that everything looks good, export your Gerber files. Make sure you select the top copper layer only and then hit OK. Your Gerber files should now be ready to send off for PC Board Fabrication. Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110 Read more: https://www.pnconline.com/blog/printed-circuit-board-routing-practices-after-auto-routing/
    WWW.PNCONLINE.COM
    Printed Circuit Board Routing Practices after Auto Routing
    In electronic design, PCB routing is the positioning of conductive pathways on a Printed Circuit Board before final soldering and interconnection.
    0 Comments 0 Shares 575 Views
  • 5 PCB Design Elements for Digital Transformation
    #PrintedCircuitBoard
    #PCBoard
    #printedcircuitboardassembly
    #PCBoardassembly
    View more: https://youtu.be/75ZB0XlOPs4
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    5 PCB Design Elements for Digital Transformation #PrintedCircuitBoard #PCBoard #printedcircuitboardassembly #PCBoardassembly View more: https://youtu.be/75ZB0XlOPs4 Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    0 Comments 0 Shares 509 Views
  • 5 PCB Design Elements for Digital Transformation
    #PrintedCircuitBoard
    #PCBoard
    #printedcircuitboardassembly
    #PCBoardassembly
    Digital transformation means many things to many people, but regardless of who you are or what you do, it’s important to have an understanding of the overall impact it has had on PCB design and manufacturing. In the past five years, our industry has seen the emergence of an entirely new manufacturing process that leverages advanced semiconductor technology and equipment to produce end products in remarkably faster and more efficient ways than ever before.
    PCB design goes far beyond simply ensuring that the PCB has all of the right elements on it, it’s an extremely critical factor in whether or not the final product will succeed or fail in the marketplace. This article will discuss five of the most important features that you should always include in your Printed Circuit design to increase its chances of succeeding in the market.
    1) Embedded Systems
    The biggest issue with embedded systems is that since we’re using digital devices for sensing and control, we need to worry about electromagnetic interference or EMI from other devices. This requires not only shielding and grounding but also capacitors in series with any power or signal lines that may have high switching currents. In addition, it can require filtering on any data line to prevent noise issues.
    Read more: https://www.pnconline.com/blog/5-pcb-design-elements-for-digital-transformation/
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    5 PCB Design Elements for Digital Transformation #PrintedCircuitBoard #PCBoard #printedcircuitboardassembly #PCBoardassembly Digital transformation means many things to many people, but regardless of who you are or what you do, it’s important to have an understanding of the overall impact it has had on PCB design and manufacturing. In the past five years, our industry has seen the emergence of an entirely new manufacturing process that leverages advanced semiconductor technology and equipment to produce end products in remarkably faster and more efficient ways than ever before. PCB design goes far beyond simply ensuring that the PCB has all of the right elements on it, it’s an extremely critical factor in whether or not the final product will succeed or fail in the marketplace. This article will discuss five of the most important features that you should always include in your Printed Circuit design to increase its chances of succeeding in the market. 1) Embedded Systems The biggest issue with embedded systems is that since we’re using digital devices for sensing and control, we need to worry about electromagnetic interference or EMI from other devices. This requires not only shielding and grounding but also capacitors in series with any power or signal lines that may have high switching currents. In addition, it can require filtering on any data line to prevent noise issues. Read more: https://www.pnconline.com/blog/5-pcb-design-elements-for-digital-transformation/ Call us: (973) 284-1600 Visit us: sales@pnconline.com
    WWW.PNCONLINE.COM
    5 PCB Design Elements for Digital Transformation
    Digital transformation means many things to many people, it’s important to have an understanding of the overall impact on PCB design and manufacturing.
    0 Comments 0 Shares 482 Views
  • Basic PC Board Rules for Successful IoT Design
    #PCBoard
    #pcboardassembly
    #pcbassembly
    #pcbassemblyusa
    #PCBDesign
    Readmore: https://www.pnconline.com/blog/basic-pc-board-rules-for-successful-iot-design-2/
    Visit us: https://www.pnconline.com
    Email: sales@pnconline.com
    Phone: (973) 284-1600
    Basic PC Board Rules for Successful IoT Design #PCBoard #pcboardassembly #pcbassembly #pcbassemblyusa #PCBDesign Readmore: https://www.pnconline.com/blog/basic-pc-board-rules-for-successful-iot-design-2/ Visit us: https://www.pnconline.com Email: sales@pnconline.com Phone: (973) 284-1600
    WWW.PNCONLINE.COM
    Basic PC Board Rules for Successful IoT Design
    IoT-based PC Board involves a precise evaluation and focusing on the power management, sensors, and the wireless connection
    0 Comments 0 Shares 390 Views