I was completely out uh this oil is very tacky if you guys have ever used bell ray blue-tac chain lube for your street bikes that's what this kind of is it's a very it's almost more like grease than oil so i highly recommend wear yourself some gloves all right so now that the air filter is back in we're going to go ahead and do everything back electric trial bike in reverse all right so after extensively washing my hands pro tip for you guys if you mix hand sanitizer with liquid dish soap any type of grease or oily especially greasy type you know like red tack grease things like that that you use on bearings will remove that stuff off your hands pretty darn good and with the whole cover thing going.

Dirt Bike Maintenance For Beginners

So now we got that back in we're going to go ahead and take our air filter you know box cover as you can see it's got two little tabs that go forward we're just going to slide it back snap it in place only goes on one way best way to know that you've got it in place well you can look down there and you can see but give it a little pull towards the front area it's going to lift up a little bit because there's a small little gapper that slides in where it has a little bit of wiggle room but you want to just feel that and just make sure it's not lifting all the way out it just pushes down latches in place there take your little hose air filter box covers one this is back in place let me go ahead and put the seat.

Dirt Bike Washing Done

We're going to go ahead and move on from there next step is the seat go ahead and grab your seat slide it in that front tab push forward pretty good look down to make sure your holes are lined up with your bolt holes grab the front of the seat give it a tug back if it's not lifting up then you know she's in place that's dunsky grab a little side plastic panel slide that up like that you don't want to put that bolt in yet because you can tell it goes through the plastic here put this forward push that behind push in on that that plastics on grab your nut that bolts your seat down 12 millimeter socket take your plastic that you removed tuck it up like that starting from the back take this side this is a little l bracket there kind of you hook it underneath push enduro bikes it on that's completely snapped in place grab your one allen bolt slide it underneath snug her down that's going to pretty much do it for today's video again if you aren't go ahead and follow me on facebook instagram if you aren't subscribed to the channel please do subscribe keep up with the air filter inspect it regularly it takes literally 10 minutes to disassemble and reassemble my crf is actually even easier than the dr don't have to remove the seat or anything like that just pop off the side panel take a couple screws out boom