Timely detection of sewer leaks is essential for maintaining a safe and healthy living environment. A sewer leak can result in substantial property damage, pose serious health risks, and lead to expensive repairs. This guide offers an overview of the causes, warning signs, and solutions for sewer leaks, helping you address the issue promptly and effectively.

Top of Form

Bottom of Form

For more information about domestic services- https://bedellhomeservices.com/plumbing/sewer-line-repair/

Sewer Leaks: Causes?

Tree Root Intrusion: Tree roots are naturally attracted to moisture in sewage pipes. They often grow into them with time obstructing these channels thereby leading to leaks as well as blockages.

Old Pipes: Older homes usually have pipes fashioned from materials that degrade over time such as clay, cast iron or Orangeburg. Such materials could crack, buckle or corrode consequently causing leaks.

Ground Movements: Natural ground movements like soil subsidence or earthquakes can cause cracks on the pipes or misalignments.

Poor Installation: If installed poorly, sewer lines may become misaligned leading to leakage after inadequate joints were made.

Clogs and Blockages- When grease accumulates together with debris plus other foreign materials there will be pressure build up hence causing leaks in a sewer line.

When Do You Know There is a Sewer Leak?

Foul Smells: The most apparent indication is if you smell something like poop within your house or outside it too.

Slow Drains – Slow drains from multiple fixtures including sinks, tubs and toilets might suggest a blockage or leak in the main line of the drain pipe system

Weird Sounds – Gurgling sounds coming from your drainage funnel would mean that air has been trapped inside due to possible leakage/blockage

Problematic Locations – In your lawn especially around where you have located the sewer line; there are areas which are always wet and others with sodden mud patches.

Cracks in the Walls: Sewer leaks cause soil erosion that cracks your home’s foundation.

Increased Pest Activity – Rats and bugs are attracted to moisture and waste thus when their numbers suddenly rise, it could be a sewer leak

How Do You Fix A Sewer Leak?

Step 1: Confirming The Leaks Exist

Signs Review – Check for the above mentioned symptoms around your house or land.

Professional Inspection: Have a plumber inspect sewer lines fully including taking camera pictures inside them.

Step 2: Identifying The Source

Camera Inspection – Plumber uses his camera which is designed specifically to transit throughout pipes so as to identify where the leak has commenced from.

Dye Testing – Using non-toxic dyes flushed through the system can help establish the source of a leak from an underground pipe

Step 3. Method Of Repair Preferred

Pipe Relining – This entails inserting a flexible tube coated with resin into the damaged pipe then inflating it. Once hardened, the resin will create a new tough pipe while using less time than replacing entire pipeline.

Pipe Bursting- It involves dragging a new pipe in place of the old one thereby causing destruction within the original joint during this process of replacement.

Spot Repair - When pipes have minor leaks, an alternative solution is digging out only where they are damaged before replacing them as advised by plumbing experts.

Complete Replacement- Sometimes, you have no alternative than to replace everything if those pipes have become very old or severely damaged due to any reason.

There is a correct way of disposing off waste; however, do not flush non-biodegradable items or throw grease or heavy debris into the sink.