It's simple to increase the range and efficiency of your Wi-Fi network by sync Orbi satellite to router. 

• To guarantee a robust connection during setup start by putting the Orbi satellite a fair distance away from the router.

•  In order to switch on the satellite plug it into a power source and watch for the power LED to solid white. 

• The satellite is now prepared for synchronisation as shown by this. Then find the Sync button on the Orbi router's rear and push it for roughly two seconds. 

• The router will indicate that it is in sync mode by blinking its white Sync LED.

• Press the Orbi satellite's Sync button right away after that. Additionally the satellite will begin to glow white on the Sync LED indicating that it is trying to connect with the router. 

• The satellite's LED should become solid blue in a matter of minutes indicating that the connection to the router has been established. 

• If the LED becomes amber the connection is passable but not great and it may be necessary to move the satellite closer to the router.

•  When a connection attempt fails a magenta LED appears; either repeat the process or relocate the satellite closer to the router.

• The smooth expansion of Wi-Fi coverage is facilitated by the Orbi satellite upon successful syncing. 

• To make sure everything is operating as it should, it's a good idea to use the Orbi app or a web browser interface to monitor the network's performance. 

• Updating the firmware frequently through the app can support preserving security and peak performance. 

• This easy procedure guarantees a strong long-range wireless network in your house or place of business.

If you have more queries about it then visit our website.
Also Read:
Simple and Easy Tips to Setup the Orbi Router