Do you ever think about why your car needs a different type of oil depending on the season? The most important thing is viscosity, which shows how thick or thin a liquid is. The thickness of engine oil is very important because it keeps all the moving parts from wearing out by lubricating them.

However, oil gets very thick when it's cold and very thin when it's hot. The engine in your car needs to be oiled all the time, no matter the weather, and this would make it unhappy. Helpers that raise the viscosity index (VI) of engine oil are like superheroes.

Getting A Sense Of Viscosity

Picture a pour of honey and water. Honey is thick and moves more slowly than water, which is thin and flows easily. That change in flow rate is known as the viscosity index of engine oil. For an engine, the best oil thickness is one that protects moving parts with a thin film without getting in the way of their movement or wasting fuel.

The trouble is that oil naturally thins out when the temperature of an engine goes up. This makes engine harm more likely because of more friction and not enough oil at high temperatures. On the other hand, thick oil makes it harder to start your engine and wears it down faster when it's cold outside.

These Are The VI Improvers

Because they keep an eye on your engine without being noticed, VI improvers play a role here. By adding these specific ingredients to base oil, which is usually a low-viscosity oil, the viscosity can be raised over a wider temperature range. 

How they work is like this:

VI Improvers' Role in High Temperatures

In response to an increase in the temperature of the engine, the function of the viscosity index improver polymer of an oil will automatically make itself thinner. It is possible that this will result in increased friction and perhaps damage if it is not addressed. If we wish to decrease the effects of this problem, VI improvers are among the most significant things we can do. In spite of the extremely high temperatures, these additives cause the oil to become more viscous and spread out. Because of this, the oil maintains a viscosity that is sufficient to protect and lube the components of the engine.

VI Improvers' Role in Low Temperatures

In environments where the temperature is low, the job of improvers is to make oil thinner

When the temperature outdoors is low, the engine oil may become more viscous and travel more slowly. In this way, the engine may be difficult to start, and its components may be stressed. Despite the fact that it is chilly outside, the oil is still able to move because of the presence of VI improvers. This ensures that the oil can circulate readily and rapidly in the initial few seconds after the engine has been started, which is very significant because it decreases the amount of wear that your engine experiences.

How did things turn out? The best of both worlds can be found when VI improvers are used to make multi-grade oils. Even when it's very hot outside, they stay thicker for better lubrication, 

and when it's cold, they flow easily for quick starts.

How to Choose the Right Oil? Why VI Is So Important

The viscosity index (VI) of an oil can be used to figure out how its viscosity changes with temperature. If an oil's viscosity index (VI) is high, it means that it doesn't change as much when the temperature does. A 10W-30 oil, for example, can be used in more situations than a straight 10W oil because it has VI improvers in it.

When looking for motor oil for your car, here are some things to keep in mind:

  • Climate: If you live somewhere very hot or very cold, a higher VI oil is the best way to keep things running smoothly all year.

  • Driving habits: It can be hard on your engine to pull big loads or drive a lot of miles with stops and starts. If you choose an oil with a high VI grade, it can protect you better.

  • Manufacturer's Recommendations: 

Always check your car's owner's manual to find out what type of oil viscosity is best.

A Look into the Science Behind VI Enhancers

  • At Rest: Now that we've talked about the useful benefits of VI improvers, let's take a closer look at the science behind them. Most of the time, these additions look like little springs made of long-chain polymer molecules.

  • Under Pressure: Its polymer chains loosen up when the oil is not being used, so they don't have much of an effect on the viscosity of the oil.

The moving parts of the engine put pressure on the polymer chains, making them longer and more tangled. These web-like chains make the oil thicker, which makes it a better lube.

The type and amount of VI improvers used have a big effect on how well an oil works. The study we quoted compared how well two VI improvers—Infineum SV 260 and Paratone 8900—raise the viscosity of a standard SAE 10W oil. The two adds had different effects on the oil's VI depending on the concentration, but the results showed that they both made the VI better.

How To Keep Your Engine Happy Is Most Important For A Happy Journey

To pick the right motor oil, you need to know about viscosity and VI improvers. When you choose a multi-grade oil with a high VI rating, your engine will get the lubrication it needs to run smoothly and quickly no matter what the weather is like. Never forget that VI improvers are very important for keeping your engine happy, which makes it more reliable.

Read Also: Lubricant Additives Manufacturer