A control arm is a crucial part of the vehicle that is mainly responsible for keeping the tire in position. And when this component is damaged, it creates a problem for the driver. So, when it is damaged, you must replace it with another part. Changing the Suspension Arm Component doesn't have to be a difficult task. Here are simple steps to help you change your suspension arm component.

Remove the wheel and separate the ball joint

Start by removing the wheel by loosening the lug nuts. Select a socket and wrench that is the right size for the nut. A stud on the ball joint extends into the wheel hub and is secured with a nut and bolt. Take them out to remove the joint.

Separate the ball joint

Take a ball joint separator and insert it in the ball joint and give a push to separate the both. If push is not doing the work, use a hammer to force it open. It is secured properly in its place, so it may take some good smacking to separate them.

Separate the control arm

Now remove the control arm from the cradle. You can remove it by simply unscrewing the nuts. Sometimes you need two wrenches to move them away from each other. Now replace the control arm and re-screw everything back together.

End Note

In this way, you can replace your vehicle's suspension arm component. You can buy these parts from a nearby store or shop for them at an online marketplace.