Frequently asked question from clients who buy wood pelletizer...

Frequently asked question from clients who buy wood pelletizer device

Posté 2022-11-24 04:00:08

1KB

( 1) Exactly how to make the mold and mildew life longer?

With the continuous intro of wood pelletizer machine right into the market, the growth of mechanical tools is additionally frequently altering. The deterioration of the mold during the manufacturing of wood pellets is likewise a significant cost. So, exactly how to maintain it directly affects the service life of the timber pellet making device. Consequently, it additionally directly affects the handling expense of timber pellets. Exactly how to make the mold and mildew life of the timber pelletizer equipment maker longer? Get your response today!

Related post: wood pelletizer machine

① Regularly tidy oil and fill

If the wood pelletizer equipment is not made use of for a month, it is recommended to clean the oil inside, so the oil will progressively harden during lasting storage, which will make it difficult to remove the next time it is used, which will seriously influence the succeeding use the mold of wood pelletizer equipment.

After the pellets are processed, it is needed to utilize oil to grind for a period of time to make certain that all the oil stays in the die opening, which is of terrific advantage to the job the next day and also is likewise for the lasting use of the die. The oil can be blended with waste engine oil as well as timber chips. It can be made once as well as can be reused.

② No demand to cleanse the mold for a long period of time

If the mold as well as pinch rollers are no longer used for a long time, it is recommended to get rid of the mold and mildew after cleansing as well as storage space. The master cleans the sawdust pellets inside the mould and also complies with the mould surface area. In this way, on the one hand, we can prevent the enterprise from being difficult to remove the pellets as a result of the hardening of the pellets because of the long-term storage of the pupils. On the other hand, since the sawdust has water absorption, if the sawdust on the surface is not gotten rid of, it might speed up the growth of the corrosion of the mold surface area.

③ The mold and mildew must be kept in a completely dry and aerated area

Related post: wood pellet processing plant

A lot of the molds of the timber pelletizer maker are constructed from alloy steel. If they remain in a damp place for a very long time, the surface area of the mold may be harmed because of air deterioration, hence greatly minimizing its life span.

④ The taking care of process should take care

The mold of the wood pelletizer machine is a high-precision component, and also the mold opening is carefully processed according to the compression proportion of the mold. If you are careless throughout the handling process, the structure of the inner wall surface of the mold and mildew hole is damaged, which may result in molding throughout handling. reduced price and also short life span.

The above are the tips on just how to make the mold life longer for timber pelletizer maker Comply with these 5 methods to keep the mold and mildew, and also I think your mold will last longer.

( 2) Why do the pellets created by the timber pellets machine have a negative look?

Why do the pellets generated by the wood pellet mill machine look negative? Today we will learn why. During the production of wood pellet gas by the wood pellet production device, there will be a situation where the pellets contain powder and also have a rough surface. Right now, it is additionally necessary to check the tools data settings of the timber pelletizer device. Besides, what is the reason for this phenomenon?

Timber pellets create more wood pellet powders, this feedstock can be brought on by low moisture web content, the dampness material of timber pellet machine feed is normally in between 12% and also ~ 15%. After adjusting the wetness material of the raw product, the trouble still exists, that is, the pressure roller die is seriously used. When the internal surface of the ring die of the timber pelletizer equipment is seriously used or the bit size requires to be changed, it needs to be replaced. The surface of the sawdust pellets is rough, which may be caused by the extreme dampness material of the raw material, or the preliminary use the mold and mildew. This trouble can be addressed by changing the dampness content of the raw material, or by continuously grinding the mold and mildew with the material.

To sum up, the reasons why the pellets created by the timber pelletizing maker are not good in appearance are mentioned today. I wish it will assist you when you use the timber pellet maker again. Throughout the years, Richi Equipment has focused on the research and development as well as manufacturing of timber pelletizer maker machines, biomass pellet makers, sawdust pellet machines, gas pellet makers, wood processing devices, drying devices, cooling down devices and also packaging devices.

Related post: automatic cat litter machine

( 3) Advised timber pellet device.

There are several timber pellet mill equipment on the marketplace. Today, Richi Machinery will certainly suggest several of them:

① The initial type of small wood pelletizer maker
It is a brand-new kind of biomass energy machinery independently created by our company's technical team and has independent intellectual property civil liberties. The wood pelletizer equipment is basic in structure, easy to run, secure in operation, and can function continuously. The pressed pellets have the advantages of high density, high burning worth, low moisture and also reduced ash material. The timber pellet device equipment transmission embraces high-precision gear transmission, four sets of equipments are attached, as well as the hydraulic oil shipment system can immediately flow oil in between the gearbox as well as the main shaft bearing. The life span of the primary shaft and also transmission gears.

The working parts of the timber pelletizer equipment die plate, stress roller) are made from alloy steel, as well as the solidity after warmth treatment can reach greater than 50, which makes certain the continuous operation of the equipment as well as prolongs the life span of the whole timber pelletizer machine The electronic control system of the main engine embraces the worldwide basic configuration of star-delta beginning, as well as the procedure is very steady.