Sticky guitar necks can be a huge problem. When you have kids around you, it is quite normal for you to experience the sticky guitars. As musicians, you must know that the guitar necks are prone to stickiness.

When you buy guitar kits, you need to follow the guidelines for building the guitar. Furthermore, it is also crucial that you maintain the condition of your guitar. After all, you don't want anything to happen to your guitar.

Here are some of the key steps you must follow when you have sticky guitar necks:

Gloss finish

Let's just admit that sticky guitar necks can be a big problem. A glossy guitar neck is meant to contribute to its beauty. However, in many cases, it can become prone to sticky necks. After a certain point of time the neck will become sticky. If you want to restore the gloss finish, you must take small steps.

Start with something basic. You should check the grade and rub the cleaning agent accordingly. The grade of the steel you will be using to clean the guitar neck is also an important factor to consider. It is advisable that you rub it clearly to get the satin and smooth finish.

If it appears to be a bit sticky or rubber-like, you should consider using the sandpaper. Make sure to use sandpaper that has around 800 grit. Gently run it across the neck so that you can clean it.

Remove the finish

You should remove the finish completely if you want to get rid of the gloss. Removing the entire finish on the guitar neck can be one prominent way to overcome the sticky finish. You should use the 285 grit sandpaper to remove the finish completely.

Sandpaper can help to remove the thinner layers of finish. When you use the DIY guitar you must check the level of grit it has. It is advisable that you follow the steps carefully so that you can tidy up the things. You can use a penknife blade too.

Depending on the level of layer or finish, you can switch the grit from 220 to 600. Eventually, you can determine what the gloss is like. You may consider moving higher to remove the guitar gloss layer.

If the layer is thick, you should use a high-quality sandpaper to maintain the gloss of the paper. It is advisable that you choose the necessary process for maintaining the finish. You can also use some oil to maintain the gloss or finish of the guitar neck.

Satin neck finish

If your guitar has a satin neck finish, you need to understand what to opt for. The DIY guitar kits usually give you the flexibility to choose the cleaning process as per the level of comfort.

Satin necks can become extra glossy, but the use of steel wool can help to overcome the challenges. When your guitar has a satin neck finish, you need to choose a higher grit sandpaper.

If you are using steel wool, be very careful with the use of it. You must avoid the use of any material that can damage your DIY guitar.  If you want to know more about guitar you can visit www.solomusicgear.com.