The maintenance of a combine harvester is an important aspect of agricultural operations. A machine of this type requires daily care and attention to prevent damage. To properly maintain your equipment, you need to understand the mechanical and electronic characteristics of the combine. Follow these tips to avoid an unexpected breakdown. When you use your combiner, you should follow the manufacturer's recommendations. Some of the most important tips for proper maintenance of combine harvester are listed below.

1. You should also inspect the combine regularly before use.

In dry crop conditions, dust and straw may accumulate in some parts. Whereby the combine process can be messy, the shoe is vital to the efficient functioning of a combine. In addition, you should check tire pressure every day to avoid dangerous tire failure.

2. The brake should be pressed evenly.

Applying only one brake can cause the combine to turn, overturn or fall. The pedals should be locked together and pressed evenly. While driving, make sure to use safety flashers to avoid any accidents. Always check headlights and radiators to make sure they are working properly. When the vehicle is not operating, you should keep it indoors to avoid infestation of rodents.

3. The combine should be cleaned thoroughly regularly.

Wash the machine with clean water to remove dirt and debris, but ensure that water does not enter the moving parts of the machine. You should also wipe off the paint and make sure there is no rat infestation. Again, it is important to check the weather stripping around the engine, wipe down the radiator, and lubricate all joints and points. This regular maintenance will keep your combine in excellent condition.

4. The combine should be thoroughly cleaned from the cab to the auger.

Its exterior should be thoroughly cleaned to avoid water damage. Before refueling, remove the radiator cap. Afterward, inspect the muffler and axial cylinder for signs of wear and tear. In addition to cleaning the cab, the machine must be equipped with fuel and oil. In addition, it should be equipped with reflectors, lights, and wires.