• Printed Circuit Board Layout Challenges
    #printedcircuitboardassemblyandmanufacturing
    A PCB manufacturer has to face many problems and most DFM issues happen while creating a board’s layout. Such issues can be minor, such as noises or missing parts, especially in BOQ or the bill of quantities. So, a manufacturer has to identify these issues and send the design back to the designer for revisions.

    Sometimes the manufacturer’s themselves make amendments, but all these efforts result in delayed and expensive production. Taking care of design in the early stages can prevent you from all layout challenges, enhancing PCB production.

    So, you can avoid the PCB layout and assembly issues by identifying them before sending them to the fabricator. Now, let’s discuss them in detail. Read more: https://bit.ly/3SLi0g7
    Website: https://pnconline.com/
    twitter.com: https://twitter.com/PNCINC
    pinterest.com: https://www.pinterest.com.au/rrosh2014/_created/
    Facebook.com: https://www.facebook.com/PNCONLINE
    myspace.com: https://myspace.com/pncinc2020
    tumblr.com: https://www.tumblr.com/blog/view/pncinc
    instagram.com: https://www.instagram.com/pnc_pcb/
    bresdel.com: https://bresdel.com/pncinc
    Location: 115 East Centre St. Nutley, NJ, 07110
    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Printed Circuit Board Layout Challenges #printedcircuitboardassemblyandmanufacturing A PCB manufacturer has to face many problems and most DFM issues happen while creating a board’s layout. Such issues can be minor, such as noises or missing parts, especially in BOQ or the bill of quantities. So, a manufacturer has to identify these issues and send the design back to the designer for revisions. Sometimes the manufacturer’s themselves make amendments, but all these efforts result in delayed and expensive production. Taking care of design in the early stages can prevent you from all layout challenges, enhancing PCB production. So, you can avoid the PCB layout and assembly issues by identifying them before sending them to the fabricator. Now, let’s discuss them in detail. Read more: https://bit.ly/3SLi0g7 Website: https://pnconline.com/ twitter.com: https://twitter.com/PNCINC pinterest.com: https://www.pinterest.com.au/rrosh2014/_created/ Facebook.com: https://www.facebook.com/PNCONLINE myspace.com: https://myspace.com/pncinc2020 tumblr.com: https://www.tumblr.com/blog/view/pncinc instagram.com: https://www.instagram.com/pnc_pcb/ bresdel.com: https://bresdel.com/pncinc Location: 115 East Centre St. Nutley, NJ, 07110 Call us: (973) 284-1600 Email us: sales@pnconline.com
    BIT.LY
    Printed Circuit Board Layout Challenges
    A PCB manufacturer has to face many problems and most DFM issues happen while creating a board’s layout. Such issues can be minor, such as noises or missing parts, especially in BOQ or the bill of quantities. So, a manufacturer has to identify these issues and send the design back to the designer for revisions. … Continue reading Printed Circuit Board Layout Challenges →
    0 Comentários 0 Compartilhamentos 2384 Visualizações
  • Aluminum Backed Printed Circuit Board Fabrication in PCB Assembly
    #PCBAssembly
    #PrintedCircuitBoard
    #printedcircuitboardassembly
    PCB is a power supply source to run different electronic devices. In PCB Assembly, Printed circuit boards have different base materials, depending on their application. In general, circuit boards have a fiberglass base, but aluminum-backed PCB is also common it has a metal base but the laminate is covered with copper. Such PCB performs better due to high-end thermal conductivity and electrical insulation.
    The aluminum-backed circuit board involves alloy plates which are a blend of three metals, including aluminum, silicon, and magnesium. These PCBs are different from fiberglass. Let’s discuss different layers in an aluminum PCB.
    View more: https://youtu.be/Ia7x2Ain-V8
    Website: https://pnconline.com/
    Facebook: https://www.facebook.com/PNCONLINE
    Twitter: https://twitter.com/PNCINC
    Instagram: https://www.instagram.com/pnc_pcb/
    Tumblr: https://www.tumblr.com/blog/view/pncinc
    Myspace: https://myspace.com/pncinc2020
    Bresdel: https://bresdel.com/pncinc
    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    Aluminum Backed Printed Circuit Board Fabrication in PCB Assembly #PCBAssembly #PrintedCircuitBoard #printedcircuitboardassembly PCB is a power supply source to run different electronic devices. In PCB Assembly, Printed circuit boards have different base materials, depending on their application. In general, circuit boards have a fiberglass base, but aluminum-backed PCB is also common it has a metal base but the laminate is covered with copper. Such PCB performs better due to high-end thermal conductivity and electrical insulation. The aluminum-backed circuit board involves alloy plates which are a blend of three metals, including aluminum, silicon, and magnesium. These PCBs are different from fiberglass. Let’s discuss different layers in an aluminum PCB. View more: https://youtu.be/Ia7x2Ain-V8 Website: https://pnconline.com/ Facebook: https://www.facebook.com/PNCONLINE Twitter: https://twitter.com/PNCINC Instagram: https://www.instagram.com/pnc_pcb/ Tumblr: https://www.tumblr.com/blog/view/pncinc Myspace: https://myspace.com/pncinc2020 Bresdel: https://bresdel.com/pncinc Call us: (973) 284-1600 Email us: sales@pnconline.com Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    0 Comentários 0 Compartilhamentos 2455 Visualizações
  • Aluminum Backed Printed Circuit Board Fabrication in PCB Assembly
    #PCBAssembly
    #PrintedCircuitBoard
    #printedcircuitboardassembly
    PCB is a power supply source to run different electronic devices. In PCB Assembly, Printed circuit boards have different base materials, depending on their application. In general, circuit boards have a fiberglass base, but aluminum-backed PCB is also common it has a metal base but the laminate is covered with copper. Such PCB performs better due to high-end thermal conductivity and electrical insulation.
    The aluminum-backed circuit board involves alloy plates which are a blend of three metals, including aluminum, silicon, and magnesium. These PCBs are different from fiberglass. Let’s discuss different layers in an aluminum PCB.
    Read more: https://www.pnconline.com/blog/aluminum-backed-pcb-fabrication-in-pcb-assembly/
    Website: https://pnconline.com/
    Facebook: https://www.facebook.com/PNCONLINE
    Twitter: https://twitter.com/PNCINC
    Instagram: https://www.instagram.com/pnc_pcb/
    Tumblr: https://www.tumblr.com/blog/view/pncinc
    Myspace: https://myspace.com/pncinc2020
    Bresdel: https://bresdel.com/pncinc
    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    Aluminum Backed Printed Circuit Board Fabrication in PCB Assembly #PCBAssembly #PrintedCircuitBoard #printedcircuitboardassembly PCB is a power supply source to run different electronic devices. In PCB Assembly, Printed circuit boards have different base materials, depending on their application. In general, circuit boards have a fiberglass base, but aluminum-backed PCB is also common it has a metal base but the laminate is covered with copper. Such PCB performs better due to high-end thermal conductivity and electrical insulation. The aluminum-backed circuit board involves alloy plates which are a blend of three metals, including aluminum, silicon, and magnesium. These PCBs are different from fiberglass. Let’s discuss different layers in an aluminum PCB. Read more: https://www.pnconline.com/blog/aluminum-backed-pcb-fabrication-in-pcb-assembly/ Website: https://pnconline.com/ Facebook: https://www.facebook.com/PNCONLINE Twitter: https://twitter.com/PNCINC Instagram: https://www.instagram.com/pnc_pcb/ Tumblr: https://www.tumblr.com/blog/view/pncinc Myspace: https://myspace.com/pncinc2020 Bresdel: https://bresdel.com/pncinc Call us: (973) 284-1600 Email us: sales@pnconline.com Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    WWW.PNCONLINE.COM
    Aluminum Backed PCB Fabrication in PCB Assembly
    In PCB Assembly Printed circuit boards have different base materials, depending on their application.
    0 Comentários 0 Compartilhamentos 2521 Visualizações
  • Microwave Printed Circuit Board Concept
    #pcboard
    #Circuitboardfabrication
    #PCBManufacturer
    #circuitboardassembly
    A microwave circuit refers to any electrical or electronic device which operates on microwaves or uses microwaves for its operation. Some examples include radar systems, satellite dishes, cell phone towers, and TV antennas among others. Such circuits are designed to operate at specific frequencies or bandwidths so that they do not interfere with each other.
    A microwave is an electromagnetic wave of frequency between 1GHz and 30GHz. It falls under the band B, C, D, and E in IEEE standards. Microwaves occupy a large part of the entire RF spectrum as compared to other frequencies. The global demand for communication devices such as routers, DSL, and mobile phones has increased significantly due to technological advancements such as internet connectivity being provided by these devices and advancements in technology by small-sized electronic components that can operate at high frequencies. As a result, there is an increase in demand for microwave circuit design services.
    Microwave PCBs have to meet certain requirements that have not changed even though the designs have.
    Understanding The Concept
    So, what is microwave PCB? Simply put, it’s a pc boardthat incorporates circuitry optimized for frequency bands in which microwave signals are most commonly used. As the boards are designed specifically for such frequencies, they offer superior performance over traditional boards in terms of both design and reliability. Besides, their smaller size and lower overall weight make them perfect for use in applications where space and transportation costs are at a premium.
    View more: https://youtu.be/--qtYnLsk_M
    Website: https://pnconline.com/
    Facebook: https://www.facebook.com/PNCONLINE
    Twitter: https://twitter.com/PNCINC
    Instagram: https://www.instagram.com/pnc_pcb/
    Tumblr: https://www.tumblr.com/blog/view/pncinc
    Myspace :https://myspace.com/pncinc2020
    Bresdel: https://bresdel.com/pncinc
    Pinterest :https://www.pinterest.com.au/rrosh2014/_created/

    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    Microwave Printed Circuit Board Concept #pcboard #Circuitboardfabrication #PCBManufacturer #circuitboardassembly A microwave circuit refers to any electrical or electronic device which operates on microwaves or uses microwaves for its operation. Some examples include radar systems, satellite dishes, cell phone towers, and TV antennas among others. Such circuits are designed to operate at specific frequencies or bandwidths so that they do not interfere with each other. A microwave is an electromagnetic wave of frequency between 1GHz and 30GHz. It falls under the band B, C, D, and E in IEEE standards. Microwaves occupy a large part of the entire RF spectrum as compared to other frequencies. The global demand for communication devices such as routers, DSL, and mobile phones has increased significantly due to technological advancements such as internet connectivity being provided by these devices and advancements in technology by small-sized electronic components that can operate at high frequencies. As a result, there is an increase in demand for microwave circuit design services. Microwave PCBs have to meet certain requirements that have not changed even though the designs have. Understanding The Concept So, what is microwave PCB? Simply put, it’s a pc boardthat incorporates circuitry optimized for frequency bands in which microwave signals are most commonly used. As the boards are designed specifically for such frequencies, they offer superior performance over traditional boards in terms of both design and reliability. Besides, their smaller size and lower overall weight make them perfect for use in applications where space and transportation costs are at a premium. View more: https://youtu.be/--qtYnLsk_M Website: https://pnconline.com/ Facebook: https://www.facebook.com/PNCONLINE Twitter: https://twitter.com/PNCINC Instagram: https://www.instagram.com/pnc_pcb/ Tumblr: https://www.tumblr.com/blog/view/pncinc Myspace :https://myspace.com/pncinc2020 Bresdel: https://bresdel.com/pncinc Pinterest :https://www.pinterest.com.au/rrosh2014/_created/ Call us: (973) 284-1600 Email us: sales@pnconline.com Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    0 Comentários 0 Compartilhamentos 1485 Visualizações
  • Microwave Printed Circuit Board Concept
    #pcboard
    #Circuitboardfabrication
    #PCBManufacturer
    #circuitboardassembly
    A microwave circuit refers to any electrical or electronic device which operates on microwaves or uses microwaves for its operation. Some examples include radar systems, satellite dishes, cell phone towers, and TV antennas among others. Such circuits are designed to operate at specific frequencies or bandwidths so that they do not interfere with each other.
    A microwave is an electromagnetic wave of frequency between 1GHz and 30GHz. It falls under the band B, C, D, and E in IEEE standards. Microwaves occupy a large part of the entire RF spectrum as compared to other frequencies. The global demand for communication devices such as routers, DSL, and mobile phones has increased significantly due to technological advancements such as internet connectivity being provided by these devices and advancements in technology by small-sized electronic components that can operate at high frequencies. As a result, there is an increase in demand for microwave circuit design services.
    Microwave PCBs have to meet certain requirements that have not changed even though the designs have.
    Understanding The Concept
    So, what is microwave PCB? Simply put, it’s a pc boardthat incorporates circuitry optimized for frequency bands in which microwave signals are most commonly used. As the boards are designed specifically for such frequencies, they offer superior performance over traditional boards in terms of both design and reliability. Besides, their smaller size and lower overall weight make them perfect for use in applications where space and transportation costs are at a premium.
    Why Microwave Technology?
    The microwave portion of telecommunications is used for point-to-point voice and data communications. You can also use it for two-way radio, cable television, and telegraphy in a limited range of frequencies. As it allows information transmission at high speeds over long distances, it is very common in military organizations. For these reasons and more, microwave technology plays an essential role in today’s technological world.

    As such, it was important that an efficient way to transmit microwaves be developed, the result was a device called a microstrip line. In short, when combined with other components, microstrip lines are what allow microwaves to travel great distances while maintaining optimal signal strength.

    A microstrip line consists of three main parts, including a metal foil, dielectric material, and a ground plane. Metal foil serves as an antenna, and the dielectric material acts as a waveguide. Whereas the ground plane provides electrical shielding. These three elements are placed on top of one another and bonded together using heat or pressure, which creates a single unit known as a structure.
    Read more: https://bit.ly/3unZWiH
    Website: https://pnconline.com/
    Facebook: https://www.facebook.com/PNCONLINE
    Twitter: https://twitter.com/PNCINC
    Instagram: https://www.instagram.com/pnc_pcb/
    Tumblr: https://www.tumblr.com/blog/view/pncinc
    Myspace :https://myspace.com/pncinc2020
    Bresdel: https://bresdel.com/pncinc
    Pinterest :https://www.pinterest.com.au/rrosh2014/_created/

    Call us: (973) 284-1600
    Email us: sales@pnconline.com
    Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    Microwave Printed Circuit Board Concept #pcboard #Circuitboardfabrication #PCBManufacturer #circuitboardassembly A microwave circuit refers to any electrical or electronic device which operates on microwaves or uses microwaves for its operation. Some examples include radar systems, satellite dishes, cell phone towers, and TV antennas among others. Such circuits are designed to operate at specific frequencies or bandwidths so that they do not interfere with each other. A microwave is an electromagnetic wave of frequency between 1GHz and 30GHz. It falls under the band B, C, D, and E in IEEE standards. Microwaves occupy a large part of the entire RF spectrum as compared to other frequencies. The global demand for communication devices such as routers, DSL, and mobile phones has increased significantly due to technological advancements such as internet connectivity being provided by these devices and advancements in technology by small-sized electronic components that can operate at high frequencies. As a result, there is an increase in demand for microwave circuit design services. Microwave PCBs have to meet certain requirements that have not changed even though the designs have. Understanding The Concept So, what is microwave PCB? Simply put, it’s a pc boardthat incorporates circuitry optimized for frequency bands in which microwave signals are most commonly used. As the boards are designed specifically for such frequencies, they offer superior performance over traditional boards in terms of both design and reliability. Besides, their smaller size and lower overall weight make them perfect for use in applications where space and transportation costs are at a premium. Why Microwave Technology? The microwave portion of telecommunications is used for point-to-point voice and data communications. You can also use it for two-way radio, cable television, and telegraphy in a limited range of frequencies. As it allows information transmission at high speeds over long distances, it is very common in military organizations. For these reasons and more, microwave technology plays an essential role in today’s technological world. As such, it was important that an efficient way to transmit microwaves be developed, the result was a device called a microstrip line. In short, when combined with other components, microstrip lines are what allow microwaves to travel great distances while maintaining optimal signal strength. A microstrip line consists of three main parts, including a metal foil, dielectric material, and a ground plane. Metal foil serves as an antenna, and the dielectric material acts as a waveguide. Whereas the ground plane provides electrical shielding. These three elements are placed on top of one another and bonded together using heat or pressure, which creates a single unit known as a structure. Read more: https://bit.ly/3unZWiH Website: https://pnconline.com/ Facebook: https://www.facebook.com/PNCONLINE Twitter: https://twitter.com/PNCINC Instagram: https://www.instagram.com/pnc_pcb/ Tumblr: https://www.tumblr.com/blog/view/pncinc Myspace :https://myspace.com/pncinc2020 Bresdel: https://bresdel.com/pncinc Pinterest :https://www.pinterest.com.au/rrosh2014/_created/ Call us: (973) 284-1600 Email us: sales@pnconline.com Location: PNC INC, 115 East Centre St.Nutley, NJ, 07110
    BIT.LY
    Microwave Printed Circuit BoardConcept
    It’s a pc board that incorporates circuitry optimized for frequency bands in which microwave signals are most commonly used.
    0 Comentários 0 Compartilhamentos 1456 Visualizações
  • How Is PC Board Designed In KiCad
    #pcbfabrication
    #PrintedCircuitBoard
    #printedcircuitboardassembly
    There are many free and open-source electronics design software packages out there, but KiCad has become one of the more popular ones due to its combination of low cost and flexibility. As with most design software, it does take some practice to learn how to use it, which is why we created this guide on how to design PCBs in KiCad.
    Whether you’re just getting started or want to review your skills, this guide will get you up and running quickly, allowing you to create your first PCB in no time.We’ll walk you through starting a new project, designing your circuit, creating the Gerber files to send off to your manufacturer, and much more.
    View more: https://youtu.be/r0HEDbbLnPw
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    How Is PC Board Designed In KiCad #pcbfabrication #PrintedCircuitBoard #printedcircuitboardassembly There are many free and open-source electronics design software packages out there, but KiCad has become one of the more popular ones due to its combination of low cost and flexibility. As with most design software, it does take some practice to learn how to use it, which is why we created this guide on how to design PCBs in KiCad. Whether you’re just getting started or want to review your skills, this guide will get you up and running quickly, allowing you to create your first PCB in no time.We’ll walk you through starting a new project, designing your circuit, creating the Gerber files to send off to your manufacturer, and much more. View more: https://youtu.be/r0HEDbbLnPw Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    0 Comentários 0 Compartilhamentos 907 Visualizações
  • How Is PC Board Designed In KiCad
    #pcbfabrication
    #PrintedCircuitBoard
    #printedcircuitboardassembly
    There are many free and open-source electronics design software packages out there, but KiCad has become one of the more popular ones due to its combination of low cost and flexibility. As with most design software, it does take some practice to learn how to use it, which is why we created this guide on how to design PCBs in KiCad.
    Whether you’re just getting started or want to review your skills, this guide will get you up and running quickly, allowing you to create your first PCB in no time.We’ll walk you through starting a new project, designing your circuit, creating the Gerber files to send off to your manufacturer, and much more.
    Step 1: Open The File
    To open up your chosen schematic file you need to double click on it. This will bring up your schematic editor, and also provide you with access to other tabs as well as additional views of your schematic. If you have more than one page in your project, they will appear separated by tabs that can be accessed at any time.

    The first thing you should do is get rid of all unused components so that there is no clutter or confusion when designing your circuit board. You can do this by selecting each component individually and pressing delete or right-clicking on them to select Remove from Project from the menu.

    Remember not to select any electrical connections you may have made during your design process because these are required for our circuit board to function correctly. When you are done removing everything that isn’t needed, save your project file under a new name so that you don’t lose what you’ve already done.
    Read more: https://www.pnconline.com/blog/how-is-pc-board-designed-in-kicad/
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    How Is PC Board Designed In KiCad #pcbfabrication #PrintedCircuitBoard #printedcircuitboardassembly There are many free and open-source electronics design software packages out there, but KiCad has become one of the more popular ones due to its combination of low cost and flexibility. As with most design software, it does take some practice to learn how to use it, which is why we created this guide on how to design PCBs in KiCad. Whether you’re just getting started or want to review your skills, this guide will get you up and running quickly, allowing you to create your first PCB in no time.We’ll walk you through starting a new project, designing your circuit, creating the Gerber files to send off to your manufacturer, and much more. Step 1: Open The File To open up your chosen schematic file you need to double click on it. This will bring up your schematic editor, and also provide you with access to other tabs as well as additional views of your schematic. If you have more than one page in your project, they will appear separated by tabs that can be accessed at any time. The first thing you should do is get rid of all unused components so that there is no clutter or confusion when designing your circuit board. You can do this by selecting each component individually and pressing delete or right-clicking on them to select Remove from Project from the menu. Remember not to select any electrical connections you may have made during your design process because these are required for our circuit board to function correctly. When you are done removing everything that isn’t needed, save your project file under a new name so that you don’t lose what you’ve already done. Read more: https://www.pnconline.com/blog/how-is-pc-board-designed-in-kicad/ Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    0 Comentários 0 Compartilhamentos 530 Visualizações
  • 5 PCB Design Elements for Digital Transformation
    #PrintedCircuitBoard
    #PCBoard
    #printedcircuitboardassembly
    #PCBoardassembly
    View more: https://youtu.be/75ZB0XlOPs4
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    5 PCB Design Elements for Digital Transformation #PrintedCircuitBoard #PCBoard #printedcircuitboardassembly #PCBoardassembly View more: https://youtu.be/75ZB0XlOPs4 Call us: (973) 284-1600 Visit us: sales@pnconline.com Location: PNC Inc.115 East Centre St.Nutley, NJ 07110
    0 Comentários 0 Compartilhamentos 563 Visualizações
  • 5 PCB Design Elements for Digital Transformation
    #PrintedCircuitBoard
    #PCBoard
    #printedcircuitboardassembly
    #PCBoardassembly
    Digital transformation means many things to many people, but regardless of who you are or what you do, it’s important to have an understanding of the overall impact it has had on PCB design and manufacturing. In the past five years, our industry has seen the emergence of an entirely new manufacturing process that leverages advanced semiconductor technology and equipment to produce end products in remarkably faster and more efficient ways than ever before.
    PCB design goes far beyond simply ensuring that the PCB has all of the right elements on it, it’s an extremely critical factor in whether or not the final product will succeed or fail in the marketplace. This article will discuss five of the most important features that you should always include in your Printed Circuit design to increase its chances of succeeding in the market.
    1) Embedded Systems
    The biggest issue with embedded systems is that since we’re using digital devices for sensing and control, we need to worry about electromagnetic interference or EMI from other devices. This requires not only shielding and grounding but also capacitors in series with any power or signal lines that may have high switching currents. In addition, it can require filtering on any data line to prevent noise issues.
    Read more: https://www.pnconline.com/blog/5-pcb-design-elements-for-digital-transformation/
    Call us: (973) 284-1600
    Visit us: sales@pnconline.com
    5 PCB Design Elements for Digital Transformation #PrintedCircuitBoard #PCBoard #printedcircuitboardassembly #PCBoardassembly Digital transformation means many things to many people, but regardless of who you are or what you do, it’s important to have an understanding of the overall impact it has had on PCB design and manufacturing. In the past five years, our industry has seen the emergence of an entirely new manufacturing process that leverages advanced semiconductor technology and equipment to produce end products in remarkably faster and more efficient ways than ever before. PCB design goes far beyond simply ensuring that the PCB has all of the right elements on it, it’s an extremely critical factor in whether or not the final product will succeed or fail in the marketplace. This article will discuss five of the most important features that you should always include in your Printed Circuit design to increase its chances of succeeding in the market. 1) Embedded Systems The biggest issue with embedded systems is that since we’re using digital devices for sensing and control, we need to worry about electromagnetic interference or EMI from other devices. This requires not only shielding and grounding but also capacitors in series with any power or signal lines that may have high switching currents. In addition, it can require filtering on any data line to prevent noise issues. Read more: https://www.pnconline.com/blog/5-pcb-design-elements-for-digital-transformation/ Call us: (973) 284-1600 Visit us: sales@pnconline.com
    WWW.PNCONLINE.COM
    5 PCB Design Elements for Digital Transformation
    Digital transformation means many things to many people, it’s important to have an understanding of the overall impact on PCB design and manufacturing.
    0 Comentários 0 Compartilhamentos 514 Visualizações