HP printers are known for their excellent services. It is easy to use and easy for anyone. This machine can be used to print multiple documents with a single click. Sometimes, users may face common errors while printing their documents. HP Printer Error 0xc18a0206 can be caused by several things which are very common and you should not be worried.

Experts are always available to assist. They will provide you with the best solution without any difficulty. Experts are well aware of HP error code 1203, so there is no need to worry. They are available round the clock to assist you. Before applying the solution, it is important to understand the root cause of the error. This post will discuss some of the reasons.

Cause of HP Printer Error Code 1203

There can be several reasons why your printer is not working properly. Before you can fix it, you need to understand the reasons behind this error. Below are the reasons for error 1203.

  • If the printer is not working properly there may be an error in the Control Panel.
  • The same error can also be caused by a faulty cartridge.
  • A malfunction of the operator panel can also be a possible cause of the same problem.
  • This error is caused by an incomplete installation of the cartridge.
  • This error is caused by dirt and debris on the printer head.

Steps to solve HP Printer Error Code 1203

  • To fix the 1203 code you need to turn on your printer machine
  • Pull the control panel towards you, and then proceed to the cartridge door.
  • Next, open the cartridge access doors and let the cartridge carrier operate.
  • You need to pull the cartridge towards you when you stop at the loading point
  • When the cartridges are removed from the printer, close the access door.
  • Now close the Control Panel, and turn off the printer device.
  • Restart the printer, and check the operator panel for any errors.
  • If the message reappears, it is likely that the printer hardware is malfunctioning.
  • If you see an error message, it means that the cartridge is not in use. You have to continue to fix the problem.
  • Remove the cartridge from the printer
  • Now you have to insert the black-coloured cartridges and insert the coloured cartridges.
  • Place the cartridges in their original position and push them back until they sit securely.
  • After turning off the control panel switch the cartridge access door on and turn it off.
  • To determine which cartridge is the problem, you can switch positions.
  • To fix the problem, remove the damaged cartridge.


These solutions can be used to fix this problem. Don't worry if the solutions don't work. You can reach us anytime to get the best service. Our experts have years of experience to provide you with the best solutions.