After the reform and opening up, my country's economic development has been continuously improving. In the past, only the wealthy could drive cars, but now almost every household has a car, so whether it is as large as the shape of the entire car or as small as the parts of a car, there have been very obvious changes, and the production has become more convenient. A lot. And auto reflective part mold is also one. So how to maintain the auto reflective part mold?

During the use of the mold, the punch is prone to breakage, bending, and gnawing, and the punch sleeve is generally gnawed. The damage of the punch and sleeve is generally replaced with parts of the same specification. The parameters of the punch mainly include the size of the working part, the size of the installation part, and the length dimension.

Springs and other elastic parts are most vulnerable to damage during use, and usually, break and deform. The method adopted is to replace. In the process of replacement, you must pay attention to the specification and model of the spring. The specification and model of the spring are confirmed by the three items of color, outer diameter, and length. Only when the three items are the same can they be replaced. Imported springs are the best. Famous brands include Raymond mold springs.

Fasten the parts and check whether the fastening parts are loose or damaged. The method adopted is to replace the parts with the same specifications.

The above is the maintenance method of Reflex Electroform Mold Insert .