Cosmetic Silicones Manufacturer introduces silicone waterproofing agents, which are silicone structural polymers. It is light brown oily, alkaline and soluble in water.

The chemical characteristics of the silica structure determine that the polymer has very good water repellency, weather resistance, heat resistance, and oxygen resistance.

The materials, objects, etc. treated with this waterproofing agent can produce a layer of air-permeable waterproof membrane, which is mixed into the building body by three millimeters. This layer of waterproof membrane can be wrapped on every tiny particle of the constituent material, and has a strong The water-repellent effect of this product does not hinder the performance of drainage pipes of various materials, and the air permeability is very good.

After being diluted, the waterproofing agent shows no color and translucent state. It can be applied to the surface of the object and can maintain the color of the original object without affecting its appearance. It can be used as a building exterior wall tile to be waterproof without affecting its color.

The waterproofing agent is used for housing construction and has good heat resistance, severe cold resistance and weather resistance.

Instructions for use:
1. Waterproof the parts with water pressure (such as pools, water towers), the amount of waterproofing agent should be 8% of the cement content, and the concentrated solution should be 4%.

2. Waterproof parts without water pressure (such as flat roofs, walls, showers), spray three times with waterproofing agent directly, but the concrete surface should be free of cracks, the base surface should be neat and dust-free, and the spraying interval should be greater than 30 minutes, can not miss the corner.
3. During the construction, the mortar must be smoothed and compacted, and no cracks should appear. Special parts such as the male and female corners and pipe mouths should be constructed with octagonal. The waterproof performance of this waterproofing agent does not change after freezing and thawing.
4. Because the product has obvious and waterproof performance. Can be added to paint, water-soluble paint, concrete, cement, perlite products, etc. After neutralization, fiber can be added. Make it have excellent water resistance. Silicone high-efficiency waterproofing agent can also be added to the melted asphalt pavement at a ratio of 1-2%, which can increase the compressive strength, heat resistance and extend the service life of the pavement.

The above content is organized and shared by Polyether Modified Silicone Oil Manufacturer, hoping to help those in need.