The Ministry Of Transport conducts an eligibility test on the vehicles and awards pass or fail certificate accordingly. You must have a pass certificate for legal driving in the UK. The main objective of the test is to check the emission and safety levels of the vehicles. This test applies to any vehicle that is older than three years. It is easy to pass this test because only some minor checks are done. But, still, every two in five people who take this test fail.

To pass this test, you just have to be regular with your vehicle’s servicing and maintenance routines. Also, you must pay close attention to any minor damages or discrepancies that might aggravate safety concerns. If you are vigilant with the self-assessment and the repairs, this test will be a piece of cake for you.

What is the MOT test?

The MOT test is an annual vehicle check-up conducted by the Ministry Of Transport to keep the pollution levels and road safety standards in check. The pass certificate is crucial for legal driving, and if you fail the test, you won’t be allowed to drive until the retest. Also, if you are found driving without a pass certificate, you will earn points on your license, which can hamper your renewal process. Additionally, your car insurance will be void until you get the certificate.

But, this test isn’t so hard because it doesn’t assess performance and engine standards. Most people fail this test due to some easily fixable issues such as washer recharge etc.

How long is the test?

The test typically lasts for about 45-50 minutes if your vehicle is perfectly fine and has nothing to worry about. However, if the examiner comes across any problems, he might send the vehicle for repair and run a retest when it comes back. This entire process can consume more time than usual, depending upon the gravity of the issue.

Even if no issues are found, sometimes advisory notes are handed out, entailing the information about minor issues that need your attention.

How to pass this test?

As mentioned earlier, clearing this test is fairly simple, and you just have to take care of some minor details. Discussed below is a list of checks that you can run on your vehicle before appearing for the MOT Scunthorpe :

• Tyre pressure: The tyre pressure must be at the vehicle’s recommended standards. A vehicle’s pressure recommendation is given in the owner’s manual and on the driver’s door.
• Tyre treads: The tread depth must be at a recommended level of 1.6 mm. For this reason, take a penny test before appearing for the test.
• Recharge the brake fluid: Locate the brake fluid chamber under the hood, near the master cylinder. Ensure that the fluid level is between the minimum and maximum marking.
• The license plate: The license plate must be tightly screwed in its holder, and the characters must be within the permissible font and font size.
• The windscreen: The windscreen must be thoroughly swept, and it should be free of any dust and spots. If there are any cracks on the windshield, replace the screen.
• The lights: All the bulbs must function properly at optimum brightness. They must be responsive to the controls and free of flickers.
• The wiper and washer: The wiper and washer must be properly calibrated. The wiper must be clean, and it must not leave any spot behind. Similarly, the washer must be fully recharged before appearing for the test.