All kinds of electrical appliances are used in our daily life, and these appliances are made from electrical appliance mould . Today we are going to talk about the electric fan mold.

For the mold of the electric fan, there is a dynamic balance, that is, the balance of rotation. These two requirements put forward higher requirements for the fan mold, that is, under the premise of ensuring the reasonable design of the mold, improve the mold manufacturing process, improve the mold manufacturing quality. The shape of the plastic parts is nearly round, and the 5 blades are evenly arranged along the outer edge. Due to the large size of the plastic parts, the arrangement of the mold cavity is 1 out of 1, and the mold embryo is FAI 4545A60 B60 C135. The shape of the fan blade determines that the mold gating system must adopt the point gate to feed the glue. The size of the plastic part is large, and the point gate is 5 points. A point gate is designed at the edge of the middle dome of the plastic part near each fan blade. The uniform design of the gating system ensures that the glue intake tends to be balanced, which helps to balance the size and weight of each fan blade.

Each mold has its key points in making. The plastic chair injection mould also has its notes.