Go behind concrete planer is usually called a surface planer, milling device or scarifier. A scarifier uses some sort of drum style cutting set up which impacts the concrete surface originating from a vertical angle. The same way a hammer could be swung down for a concrete surface, a scarifier does the following with multiple cutters which may have specialized tips to crack the concrete into particles.

It is ideal regarding removing parking lot ranges, leveling high spots, along with removing coatings, epoxy finish, waterproofing membranes, raised sidewalks, flaking paints, thermoplastics, plus much more.

These scarifiers work together with vacuum port s connecting on JHV hoover series to collect debris and debris and ideally.

It features a small, center-drum-balanced design for simple, stress-free operation. It with shockproof handle design with the comfortable long lasting operation. It doesn’t bounce and also jerk around during functioning, ensuring you can attain more consistent finishes. Walk-behind Concrete Planer/Scarifier is actually built tough and carries a rugged, all-steel construction, then it can easily withstand the actual toughest job site troubles. It is also designed with several handy features that allow it to become a popular choice real operators and construction people.

Operating walk behind tangible planer is fairly straightforward in that , it runs at one speed and is moved manually or by way of self-propulsion. The depth of your cut is adjustable and controlled with the operator based upon the inequality that you should removed.

When you need to remove more than one-quarter of an inch layer of concrete or asphalt, JIEHE walk behind concrete planer /scarifier is normally a good bet. While the profile you achieve depends on the cutting tool the machine has, you’ll still get the identical general cutting action regardless of.

A scarifier is frequently used for:

·Creating a non-slip floor on walkways and sidewalks with the addition of deep grooves;

·Leveling misaligned concrete joints and uneven surfaces by removing the superior layer;

·Removing thick floor coverings, such as tile mastics, rubber adhesives, or the thickest epoxy coatings;

·Removing damaged asphalt or maybe traffic lines from parking lots;