Mobile scaffolding is a new type of scaffolding, which is mainly used for lighting stands and background stands for large concerts. The mobile scaffolding is an upgraded product after the bowl button scaffolding. 　　

The socket of Mobile kwikstage scaffolding is a disc with a diameter of 133mm and a thickness of 10mm. The disc has 8 holes. The main component is φ48*3.5mm and Q355B steel pipe. The pole is welded on a certain length of steel pipe every 0.50m. The disc is connected to the crossbar with this novel and beautiful disc, with a connecting sleeve at the bottom. The crossbar is made by welding plugs with pins on both ends of the steel pipe. 　　

Pole: Vertical support rod with connecting plate and connecting sleeve welded on the rod 　　

Horizontal rod/crossbar: A horizontal rod with buckle joints welded at both ends and buckled with the vertical rod. 　　

Bolt: Fix the horizontal rod and the vertical rod (the bolt is on the horizontal rod, the upper part of the buckle connector pin hole is small, and the bottom is large. Due to the rivet limitation, the buckle connector can only go down, not up, and it is not easy to lose). The outer surface of the pin should be consistent with the inner surface of the horizontal rod and the end buckle joint of the inclined rod. The pin should be guaranteed not to pull out after being hammered and self-locked, and the pull-out force shall not be less than 3KN. 　　

Inclined bar: The oblique bar buckled with the connecting plate on the vertical pole, divided into two types: vertical oblique bar and horizontal oblique bar. 　　Hanging buckle steel scaffolding board: steel scaffolding board hanging on the bracket 　　

Advantages of mobile kwikstage scaffolding 　　

advanced technology 　　

The disc type connection method is the international mainstream scaffold connection method. The reasonable node design can achieve that the force of each rod passes through the node center. It is mainly used in European and American countries and regions. It is an upgraded product of scaffolding with mature technology and connection Firm, stable structure, safe and reliable. 　　

Raw material upgrade 　　

The main materials are all low-alloy structural steel (National Standard Q355B), whose strength is 1.5-2 times higher than that of traditional scaffolding plain carbon steel pipe (National Standard Q235). 　　

hot dip galvanizing process 　　

The main components are made of internal and external hot-dip galvanizing anti-corrosion technology, which not only improves the service life of the product, but also provides a further guarantee for safety, and at the same time, it is beautiful and beautiful. 　　

reliable quality 　　

The product starts from blanking, and the entire product processing has to go through 20 procedures. Each procedure is carried out by a special machine to reduce the intervention of human factors, especially for the production of cross bars and vertical poles. The self-developed automatic welding machine is used for The product has high precision, strong interchangeability, stable and reliable quality. 　　

Large bearing capacity 　　

Take the 60 series heavy support frame as an example, the allowable bearing capacity of a single pole with a height of 5 meters is 10.3 tons (safety factor is 2). The damage load reached 22 tons. It is 2-3 times that of traditional products. 　　

Less dosage and light weight 　　

Under normal circumstances, the spacing of the vertical poles is 1.5 meters, 1.8 meters, the step spacing of the cross bars is 1.5 meters, the maximum spacing can reach 3 meters, and the step distance can reach 2 meters. Therefore, the dosage under the same support volume will be reduced by 1/2 compared with traditional products, and the weight will be reduced by 1/2~1/3. 　　

Fast assembly, easy use and cost saving 　　

Due to the small amount and light weight, the operator can assemble more conveniently. Tie-up and disassembly fees, transportation fees, rental fees, and maintenance fees will be saved accordingly, and under normal circumstances it can save 30%. 　　

Market application 　　

Bridge support engineering 　　

Plant beam and slab support project 　　

Civil Construction Engineering 　　

Shipbuilding Engineering 　　

concert stage background frame 　　

Temporary Stand Project

TianJin HuiLai International Trade Co., Ltd, founded in 2012, Company is a specializing in the export of galvanized steel pipe, galvanized coil, scaffolding, steel prop, steel plank and other steel products.

TianJin HuiLai International Trade Co.,Ltd is subordinate to TianJin TianYingTai Steel Pipe Group. It is a professional export subsidiary of TianYingTai Steel Pipe Group.

Since its establishment in 2012, TianJin HuiLai International Trade Co., Ltd has export more than 600 thousand tons of steel pipe products. Customer are all over Southeast Asia, the Middle East, Europe, South America, Africa and other places. Products are mainly used in chemical industry, machinery, construction, furniture and other industries.

We have experienced staff to provide our customers with the most professional and considerate service.

our website:https://www.tytgg.com/