HP Error 49.4C02 is a common client error which stops each operation on the printer and restarts requests. The error is shown on the printer screen when this occurs. For some unfortunate customers, it was only a once, but for some it became an unchangeable migraine which would make the printer unusable because the error occurred in just a few seconds at whatever point you triggered the printer.

The print method normally leads to a print process at the moment your printer displays HP Printer Error Code 49.4c02. Any steps to correct this failure can be taken here.

Steps to Fix HP Printer Error 49.4c02

Strategy 1: Verify that the device is precise

Unplug the LAN connection and restart your printer first and foreseeable. The printer shows “Prepared Mode.” You have to watch Try printing the “Menu” scheme page and choosing “Print Setup.”

The error is with printing the system if the page has been printed precisely at this stage. If you are unlikely to do this in a superior way, you must use these means at this point:

1. Change your HP printer’s IP address.

2. Review the firmware at that stage if your printer displays “Prepared Mode.”

3. Change the introduced driver last.

If the error is not yet resolved, use the second technique to solve the 49.9c02 HP printer error.

Strategy 2: Print Line Clearing

Snap the start option and choose “Printer and Faxes” to start the line. Tap on the printer symbol at that point. Try printing it again at that point. Any operation is ticked and erased by another window.

Strategy 3: Check that your firmware isn’t obsolete or old

By various techniques you can guarantee the status of the firmware:

Method one:

· Go and print an arrangement page to the control board.

· You’ll then get a printed page that includes “Firmware Date Code” or “Variant Firmware.”

· Check the date referred to in it now.

Method two:

· Go first and choose “Back-and-Drivers” from HP’s official site.

· Enter the HP printer model number and follow the instructions on the computer.

· Select “Cross OS from the table on the screen.”

· See the “current release” date.

· Tap ‘Easy Firmware Update Utility’ if the update is available.

· Choose the interface “download.”

View Source: Hp Printer Error Code 49.4c02

If you need a specialist assistance

If you can’t correct an error 49.9c02 in HP Printer with the above solution, it is time for experts to manage it successfully. Our HP support team will help you, so call us at our helpline. Experts will discuss the issue with you and try to fix it as best they can.