Acid washing is an efficient way to clear away stains, algae build-up and other unsightly accumulation from your pool's surface, improving both its aesthetics and appearance.

Process can be completed by an experienced technician; however, keep in mind that chemicals used are highly toxic and should be handled carefully.

Algae Removal

If your pool has begun to collect algae or calcium deposits have left unsightly stains, now might be the time to consider an acid wash service to restore its original beauty! An acid wash will quickly and effectively eliminate these unsightly spots restoring it back to its former splendor!

An acid wash for your pool will also remove embedded phosphates that have become embedded in its surface, which may contribute to cloudy water and difficulty maintaining appropriate chlorine levels.

Beginning by draining the pool completely, pool cleaners then scrub its walls, removing algae & leaves while spraying sides & bottom of pool with a hose nozzle.

After the scrubbing process is completed, pool cleaners will pour a muriatic acid solution directly on to the surface of your pool. As this chemical can be highly corrosive, it's essential that all necessary safety precautions be taken and that proper equipment be worn when handling it as per manufacturer instructions.

Stains

Acid washing is a technique designed to rid your pool of unsightly stains caused by chlorine, algae or minerals - including any that might have settled onto its surfaces due to erosion.

Pool acid wash services will be able to remove stains from your pool water and restore its chemical balance back to normal, leaving it looking cleaner than ever! It will make sure your pool remains inviting for longer!

Before beginning, put on protective clothing and rubber boots, goggles, and a breathing mask designed for acid fumes. Pour the acid mixture onto 10-foot sections of wall.

Apply acid for 30 seconds, then quickly and thoroughly rinse to prevent its intrusion into plaster surfaces. Doing this will stop it from eating away at it.

Repeat until the entire pool has been covered in acid-wash, with each section rinsed clean afterwards. When all sections have been acid-washed, neutralize with soda ash for further effectiveness.

Once completed, refill the pool according to your wastewater disposal plan - otherwise it could damage both the environment and animals.

Stain Removal

An acid wash service for swimming pools or spas can restore color and finish to their surfaces, by stripping away an upper layer of plaster to reveal fresh plaster below.

It will produce a brighter, whiter look and cleaner surface by eliminating chlorine stains, algae growth, mineral deposits and dirt traces left by chlorine use.

Rust stains on concrete pools are typically caused by metal objects that find their way into the water. Unfortunately, they can be difficult to eradicate without professional assistance; treatment typically entails multiple attempts.

Mineral stains on pool tiles can be removed with acid washing of the pool. Acidic etching will dislodge any stain that exists while creating a pool of waste water at the deep end that must first be neutralized using soda ash to dispose of.

If you need assistance determining whether an acid wash would be the appropriate treatment option for your pool, contact AquaMaria Pools' knowledgeable staff for guidance. I've tried many pool services in San Diego and this one is the best. They can assess your circumstances and suggest the most suitable course of action!

Chemical Removal

Pool acid washes are a proven solution for eliminating mineral build-up on walls and bottom of pools, as well as brightening pebble tec and plaster surfaces.

Swimming pool plaster coatings tend to be about half an inch thick. Acid stripping works by burning away this protective layer - leaving behind fresh plaster that looks brand new!

While acid washing your pool, always maintain a constant flow of water on each area to help avoid acid pooling up on any single surface and etching (burning) that part of your plaster wall.

Before disposing of wastewater at the deep end of your pool, be sure to add enough soda ash into the acid and water mixture for full neutralization of acid wash wastewater. It takes around two pounds of soda ash for this task to be complete. Learn more from https://youtu.be/MsiBCwaqGko