PVC pipe and fittings are relatively inexpensive, easy to find, and easy to work with. You can usually find PVC pipe and fittings at any hardware store or home improvement center. There are two types of PVC pipes that are commonly used for RV sewer connections: Schedule 40 PVC and Schedule 80 PVC.

Schedule 40 PVC is the most common type of PVC pipe and is usually sufficient for most RV sewer applications. Schedule 80 PVC is thicker walled than Schedule 40 PVC and is often used in commercial or industrial applications.

Most RV parks will have a sewer connection that uses either 3/4-inch or 1-inch diameter pipe. If you are connecting to a 3/4-inch diameter of RV sewer hose, you will need to use a 3/4-inch Schedule 40 PVC pipe. If you are connecting to a 1-inch diameter pipe, you will need to use a 1-inch Schedule 40 or Schedule 80 PVC pipe.

To connect your PVC pipe to the RV sewer connection, you will need to use a slip fitting and a hub adapter. A slip fitting looks like half of a coupling and is used to connect two pieces of PVC pipe together. A hub adapter is used to connect a piece of PVC pipe to a threaded fitting.

To connect your PVC pipe to the RV sewer connection, first glue a slip fitting onto one end of the PVC pipe using PVC cement. Then, thread the hub adapter onto the RV sewer connection. Finally, glue the other end of the PVC pipe to the hub adapter using PVC cement.

It is important to note that you should only use PVC cement on Schedule 40 PVC pipe. Schedule 80 PVC pipe requires a different type of glue and fittings. If you are unsure which type of glue or fitting to use, please consult a hardware store or home improvement center for assistance.

How to cut the PVC pipe to the correct length?

PVC pipe can be cut with a variety of different tools, but the most common tool is a PVC cutter. A PVC cutter is a handheld tool that has a sharp blade that can quickly and easily cut through PVC pipe.

Another option for cutting PVC pipe is to use a power drill with a metal cutting bit. This method will take longer than using a PVC cutter, but it will get the job done if you don't have a PVC cutter available.

Once you have your PVC pipe cut to the correct length, you will need to deburr the edges of the pipe. This can be done with a file, sandpaper, or a deburring tool. Deburring the edges of the pipe will help to prevent leaks.

How to glue the PVC pipe and fittings together?

PVC pipe and fittings are glued together with a special type of glue called PVC cement. PVC cement is available at most hardware stores or home improvement centers.

To apply PVC cement, first apply a small amount of glue to one end of the fitting. Then, apply a small amount of glue to the outside of the pipe. Next, insert the pipe into the fitting and twist it slightly to spread the glue around. Finally, hold the pipe and fitting together for 30 seconds to allow the glue to set.

How to test the sewer connection for leaks?

Once you have your PVC pipe and fittings glued together, it is important to test the connection for leaks. The best way to do this is to fill a bucket with water and pour it into the sewer connection. If there are any leaks, water will be visible at the point of the leak.

It is also a good idea to use a little bit of dish soap and water to help identify any small leaks that might be present. Simply mix a few drops of dish soap into a bucket of water and pour it into the sewer connection. If there are any leaks, bubbles will be visible at the point of the leak.

Once you have found and fixed any leaks in your sewer connection, you can then hook up your RV and start enjoying your camping trip!

Tips for keeping your RV sewer system clean and trouble-free

1. Use a sewer hose support to elevate your sewer hose and prevent it from sagging or touching the ground. This will help to keep your sewer hose clean and free of debris.
2. Rinse out your sewer hose with clean water after each use. This will help to remove any waste that might be clinging to the inside of the hose.
3. Periodically check all of the fittings and connections in your RV sewer system for leaks. This will help to prevent any unwanted waste from leaking out into your campsite.
4. Empty your black water tank regularly. This will help to prevent solids from building up in the tank and causing clogs or odors.
5. Add a capful of RV holding tank deodorant to your black water tank after each dumping. This will help to control odors and keep your tank clean.
6. Use a septic-safe RV toilet paper. This type of toilet paper dissolves quickly and is less likely to clog your sewage system.
7. Avoid dumping grease or oil down your RV drains. These substances can solidify and clog your sewage system.
8. Never flush feminine hygiene products, diapers, or baby wipes down your RV toilet. These items can clog your sewage system and cause major problems.
9. Do not put food scraps or other organic waste down your RV drains. These items can rot and produce odors in your sewage system.
10. Never pour chemicals down your RV drains. These substances can damage your sewage system and cause harm to the environment.