We have a blaze in the fireplace every year. I am amazed how many people don't know what to do with it. I have been employing this method for years, and it works great! It is straightforward to use, and you can make as many or as few inserts as you want. You will need to get some container that holds your logs (I used an old plastic storage bin) and then places them inside the insert. The insert should be placed on top of the wood stove, so the airflow goes through the logs. Just check out my video tutorial if you are unsure where to put it.

When you're looking for a home improvement project, there's always more than one way to do it. But suppose you're considering adding a new gas line to your house. In that case, you might wonder which option is best: running a pipe from the main supply line to each fixture or running a separate line from the main supply to a central location such as a furnace or water heater. The first step is to figure out what type of chimney you have.

This is important because different types require different techniques for installation. A masonry chimney has two essential parts: a stack and a chimney cap. The stack is a large cylinder made of stone or brick. Vents come in various sizes, but most are between 6-12 inches in diameter. The cap is a flat piece of metal that goes over the top of the stack. There are also other variations like corbelled tops, double stacks, etc. The first thing you'll notice when you open up the box is the size of the unit - it's enormous! The second thing you'll see is the quality of construction. Everything feels solid and well built.

Third thing you'll notice is that the unit comes fully assembled. All you have to accomplish is add the glass and install the trim pieces. Once installed, you'll see that the team blends right into any decor. Many homeowners think they require to replace their entire chimney system when they discover cracks or holes in the flue liner. Only about 10% of all chimney problems involve the actual chimney itself. Most of the time, the problem lies within the flue liner. When the flue liner becomes damaged, it allows cold air to enter the chimney and warm air to escape. As a result, the temperature difference causes ice to form and eventually crack.

This is a good question. We have had our heat pump since 2001 and never had a problem. We live in a townhouse, and the heat pump is located outside. Our neighbor who lives next door to us has had his heat pump for 15+ years and says he has had no issues. I guess it counts on the age of the equipment. I would call the manufacturer and ask them if they have ever heard of this issue. We recently transferred into a new home and were told by the previous owner that the chimney was replaced in 2000. However, upon moving in, we witnessed that the chimney was still intact, and the roofline looked untouched.

Upon further inspection, we found that the chimney was original to the house and had been removed during remodeling. We contacted the builder and asked him why the chimney was removed, and he said it was no longer needed. He did not know how old the chimney was original. We just bought our first home last year and planned to replace the existing fireplace with an insert. We called around and found that the cost of installing an insert was much cheaper than having a contractor build a custom fireplace. So far, so good. Then we started researching fireplaces online and came across the idea of using a wood-burning stove as a fireplace. We thought that would be great because we love living in the country and don't want to use electricity to heat our home. We resolved to go onwards and purchase one from Amazon. It arrived yesterday, and we took it apart today. It looks nice and is easy to put together. But there is something wrong with the instructions. They are very confusing and hard to follow. We can't seem to get the stove working properly.

How to Install a Chimney Cap: when installing a cap, ensure you have a helper to hold down the lid while you screw it. You will likely break your chimney if you try to do it yourself. You may also desire to consider getting a professional chimney sweep to come out and inspect your chimney once you've installed the cap. A chimney cap should always be inspected at least once every two years. The chimney flue needs to be cleaned regularly to prevent any accumulation of creosote deposits. Creosote is a sticky substance that forms inside the chimney and can cause severe damage to the chimney lining.

The best way to mop the flue is to hire a professional cleaning service. This is usually done annually, but some people recommend doing it more often, depending on the smoke coming from the chimney. When you're ready to install a gas fireplace, you'll need to find a certified installer. These professionals must pass rigorous training requirements and adhere to strict guidelines by the National Fuel Gas Association (NFGA). NFGA certification ensures that the installation is safe and effective and that the fireplace meets industry standards. To learn more, visit our website today.