WPS stands for Wi-Fi Protected Setup. It helps you connect devices to the router to access internet connection with the help of a WPS button. Setting up a Wi-Fi network at home might sound intimidating but the steps and process is fairly simple. Netgear routers are one of the best selling routers in the market. They provide you with different features to access good speed internet connection. There is a WPS button on Netgear router which you can use to establish a connection between router and other devices. You would first require to enable the WPS button settings on the router to use it. Navigate to settings and make the changes. Follow the steps mentioned below.

Steps to enable WPS method:

• Go to the router configuration menu.
• Click on the wireless settings.
• Then, click on basic security settings.
• Here you will see the option, turn wireless on/off
• Click on the on button.
• Click on apply to save the changes.

Thereafter, you can simply press the WPS button on the router and the device. The device will detect each other and establish a connection.

Sometimes you face some error with your router. It can be due to internet connectivity or some technical glitch and it causes Netgear router not working. Here are some of the common troubleshooting ways through which you can resolve the errors.

Ways to resolve Netgear router not working

• The first step is to make sure that the router has been placed properly on a smooth surface.
• Restart your router. Unplug the router and modem and wait for some time to plug them back.
• Navigate to settings and manually check for any Belkin router update. Then, update the firmware of the router.
• Reset the router back to factory default settings.
• Check the wireless settings and Ethernet cable, if they are correctly configured.

Almost every router has a inbuilt firewall which provides you protection by adding an extra layer of security for your network. You can go to your router settings and modify Netgear firewall settings. Type the default IP address in any web browser. Log in using the default credentials or the customized ones, if you have changed them. Go to the security tab and select rules. Then click on firewall rules. Here, you can edit the settings by adding or delete any allowance. Configure the settings of the firewall and click on apply to save the changes.

If you find Netgear WiFi extender router light not on, reboot the router. Keep the router on and unplug it from the electric socket. Wait for a few seconds and then plug it back again. The light on the router should be on.
Source