In the world of Data Center Designs, there are different types of switches. These include the older models as well as the more recent and advanced models that have been designed to support and operate at increased speed. If your business operates in a virtualized environment, then you need to go for a switch that is compatible with standard virtualization standards such as vSphere or Microsoft Hyper-V.

The Westell Technologies WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch is an ideal switch for data centre designs where high performance, scalability and reliability are mandatory. Today, we will be detailing the installation process of this new Westell Technologies WS-C2960X-48FPD-L switch. You will also learn about the prerequisites that need to be met before beginning this installation process as well as after completion.

What is the WS-C2960X-48FPD-L switch?

The Westell Technologies WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch is a network switch that has been designed for large data centre deployments. It supports a maximum throughput of up to 48 Gigabits per second. The WS-C2960X-48FPD-L is ideal for virtualized environments such as VMware or Hyper-V. It is a fully managed switch that helps in automating the management of the entire network. It also has a built-in security feature that ensures data privacy and security.

The WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch also has a built-in 10/100/1000Base-T switch fabric. It means it can operate at full performance even if the bandwidth is limited. It has 48x SFP+ high-speed connectivity ports. Each SFP+ port can support speeds of up to 10Gbps. The switch also comes with a redundant electrical system that helps in protecting the switch from power surges and spikes. WS-C2960X-48FPD-L is also equipped with a dual redundant switch fabric that ensures high reliability.

Installation of WS-C2960X-48FPD-L Switch

The WS-C2960X-48FPD-L switch can be easily installed using the following steps. It is important to note that, the switch will be installed in a server rack or a cabinet. The switch should be mounted on a PCIe card holder that is fixed on a wall or a rack. It is recommended to bring a mouse, a printer, a laptop, etc., as these will be required during the installation process. You can also watch a step-by-step video on how to install a switch. Bring the device to the desired location using an Ethernet cable and plug the cable into any switched port on the switch.

Connect a computer to the same port using an Ethernet cable. When the computer is connected, the switch will power up the device and install the operating system automatically.

Prerequisites for WS-C2960X-48FDP-L Switch

The Westell Technologies WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch can be easily installed using the following steps. It is important to note that, the switch will be installed in a server rack or a cabinet. The switch should be mounted on a PCIe card holder that is fixed on a wall or a rack.

It is recommended to bring a mouse, a printer, a laptop, etc., as these will be required during the installation process. You can also watch a step-by-step video on how to install a switch. Bring the device to the desired location using an Ethernet cable and plug the cable into any switched port on the switch. Connect a computer to the same port using an Ethernet cable. When the computer is connected, the switch will power up the device and install the operating system automatically.

Steps to be followed while Installing WS-C2960X-48FPD-L Switch

The following steps outline the installation process of Westell Technologies WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch. The steps are divided into two parts; one is installing the switch in a server rack and the other is powering up the switch. -First, connect an Ethernet cable to any of the 48x Gigabit Ethernet ports on the switch. The cable should be brought from a switched port on the firewall or from a root switch. -Next, power up the switch using a power cord.

Power up the switch in a different location from where it will be installed. -The next step is to mount the switch on a rack. The mount should be done in an elevated position so that the cables are not prone to tangling. -The last step is to connect the switch to a firewall or a router using an Ethernet cable.

Conclusion

With the introduction of the Westell Technologies WS-C2960X-48FPD-L 48 port Gigabit Ethernet Data Center Switch, you can now easily build a scalable and high-performance Data Center network. The switch can be easily installed and managed. It offers high reliability and performs well even if the bandwidth is limited. The switch is also compatible with virtualization standards such as VMware or Microsoft Hyper-V.