White vinegar and baking soda
Empty the bathtub, or if the dishwasher is already clogged, using a cup to empty the excess water into a bucket.

Pour a small amount of boiling water into the basin.
Pour half a cup of baking soda into the sink.
Pour ½ cup of white vinegar into the sink.

Cover the sink with a stopper. This will help keep the baking soda and white vinegar reaction inside the pipes and prevent them from escaping into the sink.

Wait 5-10 minutes.
Pour another bowl of boiling water into the sink.
open hot water from the tap directly onto the sink; This is to help remove any remaining dirt stuck in the drain pipe.

rubber plunger
The use of a rubber piston is one of the effective ways to remove sediments and dirt that clog water pipes and sewage pipes because it compresses the air in the pipes, making it easier to wield them and remove the suspended matter inside. It is a tool consisting of a straight wooden handle at the end of which there is a rubber nozzle shaped like a cup As for the way it works, it is as follows:

Close any holes or nearby drains with a stopper or a piece of cloth before pouring the water into the sink, in order to generate more pressure.
Pour a little water into the basin if it does not contain standing water, in order to facilitate the work of the rubber plunger, as the water will help remove the suspended materials in the pipes.

Put the nozzle of the rubber plunger over the drain hole, and start moving the handle up and down repeatedly, to be able to empty the largest amount of dirt and solids stuck in the pipes.
Repeat the process several times in the event that there is more dirt that clogs the course of the pipes, and impedes the movement of water in them.
Pour a large amount of water after draining the pipes; This is to remove any residue stuck in it.

TRANSLATED FROM:

كشف تسربات خزانات المياه بجدة

شركات عزل خزانات بالرياض