Blowing bubbles is one of many children's favorite games. Today I will teach you how to make bubble water toys that can blow bubbles continuously at home. Colorful bubbles dance freely in the air, like very beautiful little butterflies, beautiful and lovely, dreamy and colorful, people can't help but have infinite associations and yearnings, there are always many such beautiful things in life, let us create together!

Prepare materials:
Screwdriver, switch plate, bubble ring, plastic box, cable tie, battery box, small window plate, square column, motor clip, fan blade, iron shaft, wire, gear motor, bubble liquid, 130 motor, gear with holes, foam glue, 6MM screw

Production steps:
1. Connecting line

(Point 1: The black wire is connected to the right, the red wire is connected to the left, pay attention to the color of the wiring and the positive and negative electrodes, and then fix the three wires of the same color together.)

2. Install the white square column on the small window panel with screws.

(Point 2: Then install the square column to the switch plate, pay attention to the corresponding position of the small window plate and the switch plate.)

3. Install the battery compartment on the switch plate.

(The third point: fix the geared motor on the small window plate with a tie, and then fix the other small window on the geared motor with a tie.)

4. Use motor clips and screws to fasten the motor to the small window panel on the top layer, then install the propeller

5. Install the gear with holes on the wooden bubble ring with screws, and then install the iron shaft

6. Install the iron shaft of the bubble ring into the white shaft hole of the geared motor

7. Stick the plastic box on the switchboard with foam glue (pay attention to adjusting the position of the plastic box, do not touch the rotating bubble ring)

Closing remarks:
Such an automatic bubble water toy is ready. Come and make this Children's Bubble Machine with your kids! I believe everyone can make their favorite toys!