Linksys extender setup are the finest in terms of quality. The performance by Linksys extender is seamless and unparalleled. If you have problems with dead zones in your home, a Linksys extender is enough to solve all your internet-related issues.

Assuming that you already have a Linksys extender, this article will guide you through the process of Linksys Extender Setup. With this, you’ll be able to configure your extender and start using it in a small fraction of time.

Therefore, let us get started!

Linksys Extender Setup 

There are multiple ways through which you can do Linksys extender setup The best thing is, you don’t need an internet connection to proceed with the setup. Moreover, most of the part is automated and does not require manual efforts.

Hence, follow the steps given below for easy and quick setup:

1- Start off by connecting your Linksys Wifi extender to a power outlet and make sure it is getting a proper electricity supply. Also, check the wires for any electrocuting so as to avoid any injury.

2- After the extender is turned on successfully, take a device of your choice and open a browser window in it.

3- In the browser, type in or copy-paste the web address extender.linksys.com and hit the enter button to open the webpage. Don’t worry about data availability because you don’t need internet access to open this web page.

4- When the web page is opened, you’ll be redirected to the Linksys setup page. However, if you don’t get any such page, use any other alternate browser and make sure it is up to date.

5- Once you are at the setup page, you’ll be asked to select your preferred method to continue with the Linksys Extender Setup.

6- You can either choose the access point method or range extender method as per your choice.

7- After deciding on the setup method, select it and proceed with the next button. If, in case, the webpage goes down, just refresh the browser to continue at the point where you left.

8- In the end, you will get a couple of instructions on your screen. You just have to follow all those instructions and your setup will be completed successfully.

9- After the setup is finished, the webpage will be closed on its own and the setup will be completed successfully. At this point, you can start using your extender and enjoy massive internet speed with a great connection strength.

Your internet may not be the most reliable connection. However, when you use a Linksys range extender, you gradually improve the quality of your network. Not only you get great speed but your network becomes stronger and better too.

Therefore, enjoy the fast speed and do whatever you want. Whether you want to play an online game, stream a movie, or binge-watch a complete series in one shot, your internet will not lag in any of those activities.

Lastly, we hope that you have successfully settled up your extender. If not, then contact the customer service and get help from known experts.

Why is Linksys extender setup is useful for your home Wi-fi

The Linksys extender helps you to boost your wi-fi signal at your home and it covers most of the dead spots where your wifi is not capable to reach.

If you think the Linksys extender will help you to increase the speed of your wifi, that is not what Extenders are meant for. The Linksys extender is for your home wifi to stay more strong than ever.

Streaming Netflix, Hulu, Amazon Prime or any other videos and you see the videos buffer a lot, first of all, check if your devices are receiving the good signals out from your router. If not, you dont see the good signal strength. We will recommend you to install Linksys wifi extender at your home or office.

There are various models of Linksys extenders that you can actually install to make your wifi signal strong and connect your wifi-enabled devices to the Linksys extender which are located at the dead spots.

Things to remember before Linksys Extender Setup:-

There are a couple of things that you have to remember before you install the Linksys Wifi Extender. If you lose any of these things you will not be able to Setup the extender.

• Identify the wireless network name (SSID) of the Router.
• Check for the Wireless channel ( Channel should be the same for extender).
• Remember the wireless password of the router.

Steps for Linksys WiFi Extender Setup:-

1.  Reset the extender to its factory default settings. Press and hold the Reset button of the extender at the top panel for 3-4 sec. with this LED light starts blinking on Linksys extender. 
2. Connect an Ethernet cable to your computer and the Extender.
3. Now Restart your Linksys Wifi Extender and make sure all the lights are stable.
4. Launch Google Chrome browser on your computer and open the router’s IP Address like “192.168.1.1” in the address box.
5. After that, a window will be prompted on your computer screen asking for username and password to Log in. Leave Username Blank and Password is “admin”.
6. The Linksys extender page will be open on the computer browser.
7. Click on Wireless > Basic Wireless Settings.
8. Now set the Wireless button to Manual and then enter the router’s wireless network name (SSID).
9. Go to the Wireless Security section and enter the wireless password of the router and Save Settings.
10. At last, unplug the power cables of the router and Linksys Wifi Extender and wait for 30 sec. Restart both the devices and your Linksys Extender will automatically sync with your router.

To make sure your Linksys Wifi Extender Setup is successful, open your router’s DHCP table and look for the extender IP Address.