When you have a printout and are going to finalize your record, an error message appears on the printer control panel called HP Printer Supply Memory Error. You hit it and feel frustrated. This happens when the metal contacts/chip on the toner cartridge are connected to the contacts in the printer. When the printer cannot find an installed toner cartridge, it will display an error message. If you couldn't figure it out, How Do I Fix HP Printer Supply Memory Error? Don’t panic, we’re here. In the world, HP printers are renowned for the high-quality printing they deliver. This makes them popular among many people. Moreover, it has advanced printing technology, compact designs, and compatible features. However, some users have encountered some issues with this printer. Sometimes, you may face a specific issue with your HP Printer. One of such critical problems of this printer is the "HP Printer Supply Memory Error". Nevertheless, going through all of the steps and following them will definitely help you to solve your printer-related issues. So, read this article very carefully. The steps below will guide you through the process of resolving the issue. HP recently released a firmware update which has caused quite a stir in the aftermarket community. In this case, the upgrade creates a Supply Memory Error HP Printer by preventing the upgraded printer from recognizing the aftermarket cartridges. However, there are steps that can be taken to bypass this. You can find a list of affected HP printer models and instructions on how to fix the supply problem on an HP printer in the next section.

Causes Behind HP Printer Supply Memory Error

The following are 5 common and straightforward causes to think about when you encounter an HP Printer Supply Memory Error. They can be easily identified and resolved without much hassle:

  • Packing materials, protective strips or paper jammed that haven’t been removed. 
  • Problems of the print cartridge. 
  • Damaging plastic pieces. 
  • Huddle metal contacts of the toner. 
  • Outdated printer firmware/software. 

In this case, the printer performs normally but displays a Supply Memory Error HP Printer message. To resolve this problem, ensure that there is no packing material in the printer or on the print cartridge, or replace the defective cartridge.

 

Methods to fix hp printer supply memory error

When the error message Supply Memory Error HP Printer appears on your screen, you want to figure out How Do I Fix HP Printer Supply Memory Error. Here are several factors that can help you to fx this error

Protective Strips And Jammed Paper Or No Packing Materials

Installing a new HP toner cartridge is easy because there are orange plastic clips attached and a protective stripe that indicate if it's in good condition and doesn't need to be handled with care. It is imperative to displace each of these clips and strips across the drum before installing the new toner cartridge. By doing so, the printer will not be able to print. These cartridge clips are easy to stick or stain on like sore thumbs. Here you can see an orange ring that you must pull to remove the strip from the printer print cartridge. The strip is found on one side of the cartridge.

Try resetting the printer

  • Disconnect the power cord from the printer while it is turned on.
  • Now, unplug the power cord from the power source as well.
  • After that, wait for up to 60 seconds.
  • Re-connect all the cables back to their original places.
  • Turn on your printer and see if it helps.

Try replacing the toner cartridge

If you want to avoid encountering any such error, you should make sure that you use genuine HP cartridges. Thus, if you are using non-HP cartridges, you should replace them with new and genuine cartridges. To replace the toner cartridges, follow these steps:

  • First, open the cartridge door by pressing the release button.
  • Now, pull out the toner cartridge by grasping its handle.
  • After that, get the new cartridges and remove them from their packaging.
  • Then, remove the orange cover from the new cartridge.
  • Next, pull out the orange tab to get rid of the seal.
  • It’s time to insert the toner cartridge until it locks in its position.
  • If this error message appears on HP Printers, then you must also attempt the next method.

Conclusion:

It is very likely that you will be able to get your printer back to working as it used to as well. These are then tested and proven solutions that have helped other users in getting rid of the HP Printer Supply Memory Error, and hopefully, it will help you too.