Benefits%2Bof%2Busing%2Bpipe%2Bwear%2Bpads.jpg
 
Before getting to know about the benefits of pipe wear pads, let’s start off with what are pipe wear pads? Pipe wear pads are pipeliners that are used on the outer diameter of the pipe structure. The pipe wear pads are usually made out of Fiber-reinforced polymer also known as fiber-reinforced liner. These are fitted in such a manner that it acts as a support structure for the pipeline where the vibrations in the pipeline rub against each other at a defined distance according to the entire pipeline layout. It is used in the installation of gas pipelines, oil pipelines, water substance pipelines, etc. 
 
The pipe wear pads are also recognized by names like wear pads, pipe pads, or FPR pads for short forms. The greater use of these pads is worn resistance, noise reduction, greatly reduced friction, and high strength. Mostly used in industrial installations. 
 
A gentle reminder, it’s important to get your pipeline systems a check-up from the specialists in case it needs assistance or maintenance. 
 

Is it possible to have a pipeline structure without the pipe wear pads?

 
Essentially, it’s not recommended by the experts but in case you wish to proceed without pipe wear pads, there is an alternative that serves as an entirely different structure for protection against vibrations, noise, and friction. Although, it’s a costly affair but might provide better strength to your pipeline system.
 

What are the benefits you get from installing pipe wear pads?

 
Installation of pipe wear pads helps you to avoid corrosion around the pipeline system and also longevity of the pipeline system is boosted. 
 
As we know, metal on metal can cause damage to the pipeline with a higher possibility of breakage or corrosion, these pads help a buffer gap between the pipeline system. 
 
Due to the substances constantly moving inside the pipeline system, the pipeline, according to the temperature, expands and contracts. The wear pads allow the smooth flow of substances by supporting the structure which avoids breakage or damage by the expansion and contraction. 
Easier installation as it doesn’t require welding but a certain dedicated space to support the laid structure. The wear pads are installed with the movement flow of the pipeline to ensure a smooth flow anticipating no damage.
 
So, don’t forget to add pipe wear pads to your pipeline system to ensure a longer life for the pipeline system. Safer pipeline structure, safer environment structure. Ensure all safety measures while installing to reduce chances of unwanted damage. 
 
For further information, check out - https://www.raci.tech/