Hi everyone welcome to my new article. Right if you're trying to hang up some blinds, it's not too hot to do I started taking down some old curtains that I had so I'll tell you is how to install some new blinds if you want to take down some old shades. so some old you know cordless blind whatever you may have to install these new vinyl steel blinds in your windows. they're pretty easy to put on this article will tell you how to put them on the inside of the window frames. if you are putting them on the outside window frames it's not too much different. so it should help to answer a couple of questions that you have by reading this article I got these blinds from onepriceblinds.com so they're pretty inexpensive, so what you're gonna get and the kit. Most of the kit should have about the same thing is you're gonna get these brackets to hold the ends of the blinds to the window frame. There are two Clips right here I'm not gonna use these because we tend to reuse and lower the blind square debate that they hold the bottom of the blind to the window. sill if you wish to install them there's a middle metal bracket here from the middle of the blinds. If you're doing an install that goes on the outside of the window frame this is installed. we don't need it because it goes on the inside of the window frame we got a pile of screws and two covers here. Let's slide into the ends to help keep the ends of the buy-in firmly in place into the brackets. It really helps to have a pair of scissors and the cordless drill battery-powered you'll any type will make your life a whole lot easier. 

So I'll show you what steps to do next alright so the first thing we're gonna do is to reinstall these brackets up into a window frame and the sides right up here and you just want to make sure that these ends are pointing out excusing it stick it slide the ahem points into them and you know you want to make sure you have them the right way because if they're this way the wrong way then they have nothing to hold the blinds in place. It doesn't come out of the piece of the bracket so when I install the brackets up into the window frame corner with two screws and I'll be back in a second. It's so here brackets are installed in place, I had to put two screws on the inside of the window frame depending on how hard the wood is on the window frame. You might have to get a little pilot gel and do a little pilot hole to get the screws in. These are pretty soft they're like pine window frames so these screws that came with the kit easily went into the wood doesn't take much effort at all, they do that side and there's one on the side blind I'm gonna place it in and then you can put the covers on it hold it in place. I'll tell you how to do that it's all you need to do is go to your other side.