Hey, there today I'm going to be doing an article on these blinds. Here they are cellular blinds, they're blackout blinds, this is item number zero six three six two seven seven and it says that it reduces your energy cost on your own. so I'm really curious about that claim these are a level lower brand this is really cool when you buy them in the store they have this big machine. I got these at Lowe's they have this big machine, they put the Box in and it literally cuts the edges. So they use one generic box and they cut it to size so we got the gray ones, okay and this is one of them installed since our windows are so short. They're actually like Anderson’s old awning windows. We had to get the normal length codes which you can see actually go down pretty damn far, ok so these actually go 72 inches down which is insane. So if you want to pull them up you get the button unlocks it and so that's what they look like holy up. So there are directions that come with it and they're pretty easy to follow but I'm just gonna show you how to do it really quickly. So here's where the machine literally cuts them like, it literally slices the box and they shape over it awesome alright and here's what's gonna be in the box it all comes kind of strapped together. Just do not discard used for recutting what why would I keep anyway.

Here's the manual of course tape to the blinds then you have the end pieces here these are the caps for the sides and then so this was kind of tricky, it comes with the mounting brackets on here, and to get these off, you think you would like to pinch this or something what you actually do is you just push this forward. So here it is push little pinch and then it'll pop out of that track and then you can take it off, so here's what I'm saying these caps go on the very ends so these will go on the ends. Here all right so then metal mesh membrane is actually inside so you can see that's metallic in there, it's not really metal as well your oil is like a very thin foil but it should help we're gonna go ahead and take the caps off this tape. So I can put the caps on of course the ones with the holes go on. The bottom caps are actually labeled like this one says L bottom on, it can't get any easier than that so the left side and it's shaped in such a way that you couldn't possibly put it on the wrong side. There we go with caps on simple as that okay so you don't want to crack your window frame itself so you're gonna get a 1/16 drill bit to pre-drill the holes, so we're gonna hang these flush to the window so they even say top on these. You cannot do this wrong this top so I'm gonna drill-like here which gives us room to push it out if we need I'm just gonna get my two starter holes here okay marks my spots and I wish I had a longer drill bit. That’s all about today, see you in the next article to talk about this more and more.