Modern style and qualified software program, As discussed, the MX922 instantly prints and also scans in a duplex. Paper capacity is respectable for a little office multifunction: 250 sheets, which stay in a bottom-mounted cassette that reaches handle legal-sized paper. Directly above the cassette as well as disclosed when the front panel decreases are a 20-sheet image tray for 4-by-6-inch media, and also a feed for optical media. Similar to the majority of Canon printers, the front panel drops immediately as printing starts, so you can keep it closed for looks yet not have to bother with a paper catastrophe when you send a job. The Canon Pixma MX922 is a versatile multifunction inkjet printer, literally in addition to feature-wise. It has Canon's signature rounded edges, a diagonal top and base, as well as many of the style renovations presented with the Pixma MG6320-- including the wrap-around front panel and little flip-open ink gain access to lid. However, it keeps Canon's last-generation controls, with the 3 activity switches and also different four-way arrow. 

 

1. Connecting to the Wireless Network
2. Click Connect to the network on the Printer screen Continue to follow instructions until the Setup Procedure Selection screen appears. This is shown below: 
3. The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop button on the printer’s operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown below)*.
4. If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard setup on the printer's operation panel, then click Other Methods on the Setup Procedure Selection screen
5. If you selected the Push Button Method, follow any remaining instructions to complete setup. Skip ahead to instruction
6. If you selected Other Methods, please continue to the next page for important information
7. The printer  Canon PIXMA MX922 Wireless automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop button on the printer’s operation panel and click on Other Methods on the Wireless Printer Setup Procedure Selection screen.
8. If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard setup on the printer's operation panel, then click Other Methods on the Setup Procedure Selection screen
9. If you selected the Push Button Method, follow any remaining instructions to complete setup. Skip ahead to instructions
10. If you selected Other Methods, please continue to the next page for important information
11. If you don't know your Access Point / Router name or SSID*, or the Passphrase or Network key for your wireless network, you can find this information during Standard setup using the Setup CD-ROM or the downloaded files (Mini Master Setup or Master Canon mx922 setup).*
12. The terms 'SSID' and 'AccessPoint/ Router' refer to a name used to identify the specific Access Point or Router. "Passphrase' and 'Network  
13. Key' refers to a password required to prevent unauthorized access to communication.
14. Look for the Confirm the access point name or the Confirm the network key (automatic display) buttons during the setup procedure.
15. Clicking either of these buttons will give the needed information. See example below of the Wireless Lan Setup Information window. (appearance varies depending on Operating System). Use the provided information when selecting the Access Point / Router and for entering the Network Key
16. Clicking either of these buttons will give the needed information. See example below of the Wireless Lan Setup Information window. (appearance varies depending on Operating System). Use the provided information when selecting the Access Point / Router and for entering the Network Key.
17. Network setup is complete. Continue to follow any remaining On-screen instructions to install the software. On the Software Installation List screen, select any software to be installed. MP Drivers is required for the printer to be able to print and scan and cannot be de-selected. My Image Garden and Quick Menu are highly recommended to take full advantage of your printer’s features.

1. When attempting to print in a wireless LAN environment, message Printer not responding may appear. There are several possible causes for this message.
2. Refer to the following list of recommendations then click on the link to open the article and resolve your issue.
3. The computer and access point (or wireless router) have lost connection. Restart the computer and then attempt to print again.
4. The access point (or wireless router) and wireless printer may not be communicating. Power off and back on the access point and printer to restore communication.
5. The printer driver is configured to the proper port.
6. The Canon wireless printer will detect nearby access points. If an incorrect access point was inadvertently selected, you will be able to select the correct one. Confirm the network name matches the one selected on the printer and the one on the computer.

1. Go to the Canon WLAN setup button 
2. Click OK get "WPS detected"  
3. The airport has no WPS button
4. Select other setup option 
5. The screen shows my Network is available Gives me a list of security settings
6. ( Disable, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES)
7. WPA2-PSK (AES) is highlighted and I selected that. Enter my network password and the printer displays connected to access point
8. The green light is displayed on the Airport
9. I have no problems connecting to the Internet or to a Blue-Ray
10. When I try to print, the printer is Offline
11. Rebooted the MAC, Airport, and printer several times.

1. Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that the configuration of the computer and access point or router is complete.
2. The Network Connection Canon PIXMA MX922
3. The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
4. In an office setup, consult your network administrator
5. If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
6. If an error message appears or if you have trouble with the network connection, refer to the printed manual: Network Setup Troubleshooting.
7. Place the machine and computer on the same network segment.

1. To use the Canon Pixma MX922 by connecting it to a computer Mac, Linux, Windows, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)
2. Log on as the administrator (or a member of the Administrators group).
3. Quit all running applications before installation.
4. Do not switch users during the installation process.
5. Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
6. It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
7. If the firewall function of your security software is turned on, a warning message may appear that Canon PIXMA MX922 wireless setup software is attempting to access the network. If such a warning message appears, set the security software to always allow access.

Canon PIXMA MX922 Wireless Setup

1. First, you need to do is to put the driver CD of the type series Canon PIXMA MX922 printer into your computer or laptop.
2. You can find the CD driver on the package box that you get when you buy a printer.
3. If you lose your driver CD of her, do not panic because you can easily look it up on the web and free to download the drivers, because it is more specific Canon PIXMA printers in Canon's official website.
4. The next thing is after that then last, you need to run the setup file from the driver CD. However, most of the time, the setup will run automatically when you've put the driver CD in your laptop or computer.
5. The next screen will appear that will let you choose, This is to select the settings for wireless or USB settings on your printer.
6. You also know that you have to select the wireless settings because it is for what you want out of this printer.
7. So, therefore, you should skip the USB setup on the installation for the wireless setting.
8. And a new screen will pop up that will tell you to turn on the printer before you finally can process you want to do.
9. Furthermore, another screen will appear that will tell you to choose the connection settings.
10. For the first option is WPS and the second is a cableless arrangement. You just need to choose the second option on the Setup cableless earlier.
11. If you use Windows XP, you just need to choose another Setup located in the lowest part of your laptop or computer screen.
12. Once you have selected Setup cableless, please hold the Wi-Fi button and wait until the alarm light blinks twice.
13. After that, the Wi-Fi will flash faster for a short time and you will be able to continue the installation process by clicking Next on your screen.
14. After you do all that, you just need to select the area where you purchased the printer.
15. There are a few choices that you can choose the area and you will need to select the correct one based on where you are.
16. Furthermore, the same thing applied when you choose the country later on after you select the region where you purchased the printer.
17. The next thing that needs to be done when everything is done, you just have to accept the terms and agreements.
18. Then the wizard will automatically start the installation process and you just need to wait for the process to be completed.
19. Things you need to do when the entire installation process is complete, then you can use the wireless features on your Canon PIXMA printer.

Fix Canon Printer In Error State