The phone parts are cell phone parts near me but I'm going to show you as if I'm starting from scratch with a brand new screen your earpiece speaker is adhered to the back of your existing screen so we're going to show you how to remove it starting with a little bit of heat from our heat gun or a blow dryer to soften up the adhesive and then peel it away from the display will show you how to reinstall that later on in our assembly here's a good shot of our framework with our reinstalled adhesive strips all of our replacement parts are sent out with pre adhesive strips you're going to use a precision knife or a pair of scissors and get it to size and shape and install it accordingly in cell phone parts near me preparation for your replacement parts here's a cell phone parts near me shot of our adhesive installed directly on to the sides of our display assembly at this point we can go ahead and start to remove the covers on our adhesive strips when laying our new adhesive let's not forget to cut our holes for our front facing camera earpiece speaker and proximity sensors let's go ahead and set our display use a little heat to soften up and sticky up the adhesive let's not forget to fish through our ribbon cable here in the hole and we can align our display now into our framework.

The Motorola Mobile parts and devices:

Once set into the new adhesive and firmly press down on the display all the way around the perimeter until it's set and there's our completed assembly awaiting the reinstallation of our internal components at this point let's reinstall the earpiece speaker into the housing and the top of the phone don't forget the LCD protective plate we can our set our motherboard back down into the center of the phone aligning our front-facing camera into its housing our display assembly connections here into the appropriate locking sockets don't forget to double check those connections and make sure that they're locked down appropriately the blue protective cover let's not forget the power and volume buttons here on the side of the phone before reinstallation of our bid frame we can lay our battery down over top of the center of the phone and align our ribbon cable for the connection into the motherboard snap our midbrain back into place and one of the line that's cell phone parts near me screws with our last screw in we can bring in our back cover and snap it into place at this point we can power it on and check for full functionality and there you have it another successful repair by cell phone parts near me fix easily.