- AustraliaElectrical Services в
- 23/756 Burwood Highway, Ferntree Gully VIC 3156Проживает в
- Burwood HighwayИз
- Electrical Maintenance
https://reeveselectrical.com.au/electrical-maintenance/Electrical Maintenance https://reeveselectrical.com.au/electrical-maintenance/0 Комментарии 0 Поделились 159 Просмотры
- Electrician Melbourne
The 5 Best Ways to Use LED Lighting
#1: Uses in the home every day
Domestic Electrician Melbourne says that LED lights could help you save money on your electricity bill.
There are many different kinds of LED light strips, such as recessed lighting and watt/lumens conversions for general use.
When the bulb in a regular light fixture, like a lamp, burns out, it can be replaced with an LED bulb.
Specialty bulbs, like those used in appliances, can be replaced with LED bulbs that look the same.
Floodlights that light up porches, driveways, patios, decks, and back yards can also be made with LED bulbs.
LED lighting can be used to replace regular bulbs in desk lights and reading lamps in a home office to make it easier to see.
https://reeveselectrical.com.au/commercial-electrician/0 Комментарии 0 Поделились 610 Просмотры
- Industrial Electrician
Why Should Your Business Install A Power Generator?
Do you have a backup generator for your company? If not, you might be making a serious (and expensive) error. Since power outages can occur at any time, it can be challenging to keep your company operating and making money.
https://reeveselectrical.com.au/industrial-electrician/0 Комментарии 0 Поделились 346 Просмотры
- Electrician Melbourne
Your Convenient Checklist To Eliminate The Risk Of Electrical Shock
The typical home has a number of electrical gadgets setup by Electrician Melbourne, each of which, given the right set of circumstances, has the potential to be a cause of personal injury. Shocks from an electrical current are, at the absolute least, an annoyance, but they are frequently highly dangerous.
Electrical shocks can be caused by a variety of factors, the most common of which include faulty appliances, incorrect or deteriorating wiring, and cords that have been broken. You are in luck since there are things you can do to reduce the likelihood of anything like this occurring.
Maintain A Safe Distance Between The Electronics And Any Water Sources.
Because water is such a good conductor of electricity, it should be kept as far away from electrical appliances as is humanly practical. In spite of the fact that it can be difficult to avoid gadgets in the kitchen, it is very vital to keep working areas dry.
The bathroom presents the greater challenge. It is best to refrain from using the hairdryer in the restroom, and you should also make sure to keep the phone charger out of the way.
Don't Plug Or Unplug Under Load
The phrase "under load" refers to a circuit that has been wired and is operating. If someone were to try to disconnect an appliance at that same moment, the electricity may flow and cause an arc that could cause you to receive an electric shock.
It is absolutely necessary to turn off the device that is working before unplugging it. Even if you are turning the device on, you still need to make sure that it is turned off before you plug it in.
Make Use Of Tools With Insulation.
Always use insulated tools if there is a possibility of coming into touch with open wiring or electrical work.
In the event that the tool slips out of your hands and creates an unintended connection, it will shield you from the possibility of receiving an electric shock. The quantity of exposed metal on insulated equipment is normally kept to a minimum.
Make It A Habit To Regularly Inspect The Extension Cords.
Damaged extension cords can be highly dangerous. It is also very important to keep in mind that the cords should not be overloaded above their maximum capacity. Even an extension cable that is only slightly damaged might be a source of trouble, so getting rid of it entirely is your safest bet in this situation.
Put In GFCI Plugs And Outlets.
If it senses any kind of electrical problem, a ground fault circuit interrupter, often known as a GFCI outlet, will immediately turn off the electricity. They are a great addition to kitchens, especially considering that the kitchen is frequently the room in a house that has the most issues.
When Drilling Into Walls, Exercise Extreme Caution.
DIY home improvement projects can be exciting, but they also carry the risk of injury. When drilling into walls in a home, homeowners should proceed with extreme caution.
An electricity detector is an essential piece of equipment that may be utilised to determine whether or not there is wire hidden beneath the walls. It's possible to get an electric shock or even ignite a fire if you accidentally run a drill into any wiring.
When Cutting The Grass On The Yard, Exercise Extreme Caution.
Because of the cord that needs to be moved out of the way, operating an electric lawnmower can be challenging. You should only use the lawnmower when the grass is completely dry, and you should check that the cable is in good condition before each usage.
Observing Proper Precautions While Operating Various Machines
Taking care of electrical equipment has never been as risk-free as it is now thanks to advancements in technology. Nevertheless, electricity is a significant problem. In order to ensure that the electrical system in your home is secure, you should get in touch with licenced electricians and arrange for an inspection.
https://reeveselectrical.com.au/commercial-electrician/0 Комментарии 0 Поделились 1224 Просмотры
- Ev Charging/ Charging
Requirements for EV Charger Installation
Each charger ‘should’ have its own socket outlet and be on its own circuit.
As many consumer incoming mains are in the 35A to 50A range, even one added 16A charging socket-outlet can cause an overload. So, when an EV charging point is added, the electrician should do a maximum demand assessment. This can mean a consumer mains upgrade.
It may also go further, requiring upgrading of the distributor lead-in from the street, especially if there is more than one EV and they are on separate socket outlets, as in AS/NZS 3000 Appendix P. Switchboard upgrading or replacement may result, and additional AS/NZS 3000 requirements may apply.
For residential installations with PV there may be some benefit when charging an EV. However, as most cars used for travel to work or used at work will be away during the day, this may not be a solution unless a battery system is installed.
These issues may be exacerbated for those living beyond a city or large town, where the poles and wires may be able to carry only small loads. In such cases, other solutions – including batteries – may have to be considered.
Some retailers may off er tariff reductions, but this can require an extra meter, changing to a smart meter, extra switching or extra meter panel space.
Again it could mean a total switchboard replacement, and other AS/NZS 3000 requirements – such as more residual current devices (RCDs) – may apply.
Also, it is important to note that every point in the charging, discharging and inverter system circuits will involve losses of around 10% at each step and where this involves metered power, these losses will automatically be included in the home occupier’s electricity bill.
All of this offers great opportunities for electrical contractors keen to get involved and become known as EV specialists including;
installation of socket-outlets and/ or chargers for every residentially-homed EV
possible upgrading of consumer mains and power supply in-feeds from the street; and,
possible upgrading or replacement of switchboards, meter panels and RCDs.
https://reeveselectrical.com.au/ev-charging/0 Комментарии 0 Поделились 784 Просмотры
- Caravan Camper-Trailer-240V Electrical
Choose Reeves Electrical for Caravan Electrical Services in Melbourne
In order to enjoy life on the road, you need to ensure your caravan or camper trailer is equipped with all the necessary mod cons. Keep Reeves Electrical in mind for all your caravan electrics needs in Melbourne to ensure minimal downtime and inconvenience. With almost 30 years of industry experience, our qualified electricians provide a variety of camper trailer electrical services in Melbourne including:
General electrical repairs
Solar panels – the most sensible way of powering your caravan
Battery chargers – essential for enjoying comfort and convenience on the road
LED lighting – a fantastic energy saving option for caravans
Wiring – an essential component of safely travelling with your caravan or camper trailer
External repairs and installations
Today, caravans, camper trailers and RVs are far more complicated and technologically advanced than they used to be. Pretty much all your daily essentials, as well as some luxuries, can be incorporated into your caravan, allowing you to ‘get away from it all’ while still staying connected. Reeves Electrical offer caravan electrics throughout Melbourne’s eastern suburbs, working on 240v caravans in particular. Our electricians also conduct general trailer wiring, which allows you to tow a caravan or trailer behind your vehicle safely and with the knowledge that the lights and trailer brakes work properly.
For a detailed understanding of all our caravan electrical services across Melbourne’s eastern suburbs, it’s best to call our team directly to see how we can help.
Why work with Reeves Electrical for your camper trailer electrics in Melbourne?
Many people purchase caravans with the intentions of doing their own renovations and refurbishments. In reality, however, caravan electrics must be carried out by a qualified electrician. Low-quality caravan wiring can pose a major risk to you when you’re on the road, and cost you more money in the long run.
Instead, opt for a professional installation the first time around with Reeves Electrical. We use the highest quality parts to carry out all electrical repairs and installations, allowing you to get back on the road safely and soundly. We also conduct all necessary works at your property, eliminating the need for you to travel in your potentially-unsafe caravan. For more information on the specific services we offer, enquire about our camper trailer electrics for Melbourne’s eastern suburbs today!
Everything you need to know about our camper trailer electrical services in Melbourne’s eastern suburbs
Reeves Electrical are the go-to team for RV, caravan and camper trailer electric services in Melbourne. Being fully licensed and insured, you can completely rely on our team for flawless installations and repairs. Customers can rely on us for high-quality workmanship, a positive attitude and an exceptional level of service.
From essential wiring to luxurious home entertainment installations, we’re the ones to call to improve the safety, convenience and comfort of your caravan. We can even carry out electrical services for businesses looking to kit out their fleet of caravans and camper trailers!
https://reeveselectrical.com.au/caravan-camper-trailer-240v-electrical/0 Комментарии 0 Поделились 1268 Просмотры
- Data Cabling/ Cabling
Melbourne’s Commercial Data and Network Cabling Professionals
Keeping your office securely connected to its data network is essential to ensuring that your employees can remain efficient and productive throughout the work day. Over time, existing cabling can require repair or reconfiguration, depending on how the needs of your office change.
Here at Reeves Electrical, we are proud to offer comprehensive data cabling solutions for businesses in Melbourne’s eastern suburbs. Whether you require a complete overhaul of your current cabling, or simply need some maintenance work down, we can keep you connected all year ‘round.
Get in touch with us today to organise your free quote!
Why is data cabling so important to your business?
When you have an office full of employees, ensuring that everyone is connected to the same network can be a lot trickier than it might initially seem. This is where we come in; the Reeves Electrical team can take care of all of your commercial data and network cabling needs to ensure that your office is running smoothly at all times.
• Installation of new data cabling networks.
• Installation of new data lines or cabling, for new employees or work areas.
• Identification and repair of data cabling faults.
• Installation of patch panels, communication cabinets and ports.
• Relocation of your data cabling network.
Our end-to-end data cabling solutions is the ideal way to keep your business up and running at all times, ensuring you don’t need to deal with any network faults that could affect your bottom line.
We guarantee affordable and fast solutions
Reeves Electrical has been providing stand-out electrical solutions to homes and businesses throughout the eastern suburbs of Melbourne since 1992. Our team is dedicated to providing exceptional customer service and tight turn-arounds, because we know how important it is to organise a quick-fix when something in your home or office isn’t working as it should.
All our electricians are highly qualified, experienced and hold their electrical license. From the moment you book your quote to the moment we leave your property, our goal is to provide you with a stress-free experience. This commitment is what has established us as a leading industry name throughout Melbourne for almost three decades.
https://reeveselectrical.com.au/data-cabling/0 Комментарии 0 Поделились 489 Просмотры